PartsTable
Technical Data Sheet
Download PDF

9419475 — NUT,SELF-LOCKING,CONE SEAT,HEXAG

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9419475: NUT,SELF-LOCKING,CONE SEAT,HEXAG.

NUT,SELF-LOCKING,CONE SEAT,HEXAG. Key specifications include material: STEEL OVERALL, nut_style: CONE SEAT, HEXAGON, nut_height: 0.258 INCHES MINIMUM AND 0.302 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNIFIED NATIONAL COARSE (UNC), cone_seat_angle: 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-119-3668, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9419475
NSN: 5310-01-119-3668
FSC: 5310 — Nuts and Washers
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleCONE SEAT, HEXAGON
nut_height0.258 INCHES MINIMUM AND 0.302 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
cone_seat_angle40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats0.489 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
nominal_thread_size0.312 INCHES IN
thread_quantity_per_inch18
NSN5310-01-119-3668
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9419475 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.489 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
CONE SEAT ANGLE: 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
•
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
•
NUT HEIGHT: 0.258 INCHES MINIMUM AND 0.302 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.489 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.312 INCHES IN
CONE SEAT ANGLE40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
NUT HEIGHT0.258 INCHES MINIMUM AND 0.302 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
NUT STYLECONE SEAT, HEXAGON
THREAD CLASS3B
SUBSTITUTES & CROSS-REFERENCES 5
14010051Reference document
Same NSN cross-reference
Reference document — Secondary reference
9422295Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
9422275Reference document
Same NSN cross-reference
Reference document — Secondary reference
5310PL0795418Reference document
Same NSN cross-reference
Reference document — Informative reference only
E-50-101Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 9419475?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9419475?
9419475 is a NUT,SELF-LOCKING,CONE SEAT,HEXAG.
What parts can replace 9419475?
There are 5 known substitutes for 9419475: 14010051, 9422295, 9422275 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9419475?
9419475 is cataloged in the U.S. Government catalog under NSN 5310-01-119-3668. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9419475