PartsTable
Technical Data Sheet
Download PDF

9419337 — FEEDER,CHEMICAL SOLUTION,WATER P

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9419337: FEEDER,CHEMICAL SOLUTION,WATER P.

FEEDER,CHEMICAL SOLUTION,WATER P. Key specifications include material: STEEL COMP 1020 OVERALL, nut_style: EXTERNAL TOOTH, nut_height: 0.125 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF, overall_height: 0.156 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-094-3421, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9419337
NSN: 5310-00-094-3421
NIINs: 000943421, 013648658
FSC: 5310 — Nuts and Washers
CAGE: 11862 — GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT (USA)
SPECIFICATIONS
materialSTEEL COMP 1020 OVERALL
nut_styleEXTERNAL TOOTH
nut_height0.125 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
overall_height0.156 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats0.375 INCHES NOMINAL IN
nominal_thread_size0.190 INCHES IN
washer_outside_diameter0.406 INCHES NOMINAL IN
thread_quantity_per_inch32
NSN5310-00-094-3421
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9419337 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WASHER OUTSIDE DIAMETER: 0.406 INCHES NOMINAL IN
•
WIDTH ACROSS FLATS: 0.375 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT HEIGHT: 0.125 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.156 INCHES NOMINAL IN
WASHER OUTSIDE DIAMETER0.406 INCHES NOMINAL IN
WIDTH ACROSS FLATS0.375 INCHES NOMINAL IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT HEIGHT0.125 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
NUT STYLEEXTERNAL TOOTH
THREAD CLASS2B
SUBSTITUTES & CROSS-REFERENCES 6
69-561-4Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
511-101800-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
870-1230Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
501P10080000AMBReference document
Same NSN cross-reference
Reference document — Design control — primary reference
523204Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
30554-69-561-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 9419337?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9419337?
9419337 is a FEEDER,CHEMICAL SOLUTION,WATER P.
What parts can replace 9419337?
There are 6 known substitutes for 9419337: 69-561-4, 511-101800-00, 870-1230 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9419337?
9419337 is cataloged in the U.S. Government catalog under NSN 5310-00-094-3421. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9419337

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.