PartsTable
Technical Data Sheet
Download PDF

94193-2 — BEARING,ROLLER,TAPERED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

94193-2: BEARING,ROLLER,TAPERED.

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include flow_angle: 90.0 DEGREES SECOND END, seat_angle: 37.0 DEGREES FIRST END, thread_class: 2B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.375 INCHES NOMINAL IN, connection_style: FLARED SECOND END. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-4440, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
94193-2
NSN: 3110-00-100-4440
NIINs: 001004440, 008730833
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 65177 — PATTERSON PUMP CO DIV PATTERSON PUMP COMPANY (USA)
SPECIFICATIONS
flow_angle90.0 DEGREES SECOND END
seat_angle37.0 DEGREES FIRST END
thread_class2B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.375 INCHES NOMINAL IN
connection_styleFLARED SECOND END
thread_directionRIGHT-HAND FIRST END
features_providedELECTROSTATIC DISCHARGE CAPABILITY
nominal_thread_size0.438 INCHES FIRST END IN
end_connection_designELBOW FIRST END
inside_surface_conditionSMOOTH
thread_quantity_per_inch20 FIRST END
NSN3110-00-100-4440
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 94193-2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 2.1250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
OVERALL OUTSIDE DIAMETER: 8.3750 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.2810 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.3120 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.5000 INCHES NOMINAL IN
•
CONE WIDTH: 2.6250 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
CUP WIDTH2.1250 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
OVERALL WIDTH2.6250 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER8.3750 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.2810 INCHES NOMINAL IN
CONE CORNER RADIUS0.3120 INCHES NOMINAL IN
STANDOUT WIDTH0.5000 INCHES NOMINAL IN
CONE WIDTH2.6250 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER4.0000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 8
6300-4-225Reference document
Same NSN cross-reference
Reference document — Secondary reference
932-941Reference document
Same NSN cross-reference
Reference document — Secondary reference
6190-1-88Reference document
Same NSN cross-reference
Reference document — Secondary reference
5200-1PC25Reference document
Same NSN cross-reference
Reference document — Secondary reference
78197AReference document
Same NSN cross-reference
Reference document — Secondary reference
11200-1-25Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 94193-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 94193-2?
94193-2 is a BEARING,ROLLER,TAPERED.
What parts can replace 94193-2?
There are 8 known substitutes for 94193-2: 6300-4-225, 932-941, 6190-1-88 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 94193-2?
94193-2 is cataloged in the U.S. Government catalog under NSN 3110-00-100-4440. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 94193-2