PartsTable
Technical Data Sheet
Download PDF

9417497 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9417497: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN, hole_diameter: 0.229 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN, overall_diameter: 0.868 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN, special_features: NUMBER 12, 0.216 WIDE TYPE B FLAT WASHER, surface_treatment: ZINC OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-510-6029, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9417497
NSN: 5310-01-510-6029
FSC: 5310 — Nuts and Washers
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
hole_diameter0.229 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN
overall_diameter0.868 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
special_featuresNUMBER 12, 0.216 WIDE TYPE B FLAT WASHER
surface_treatmentZINC OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identificationTRUCK, VEHICLE SYSTEM, 1 1/4 TON (HMMWV)
cross-sectional_shape_styleRECTANGULAR
NSN5310-01-510-6029
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9417497 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.868 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: ZINC OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.868 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SPECIAL FEATURESNUMBER 12, 0.216 WIDE TYPE B FLAT WASHER
SURFACE TREATMENTZINC OVERALL
PERIPHERAL SHAPE STYLEROUND
END ITEM IDENTIFICATIONTRUCK, VEHICLE SYSTEM, 1 1/4 TON (HMMWV)
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.229 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN
THICKNESS0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
307124-ZReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9417497?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9417497?
9417497 is a WASHER,FLAT.
What parts can replace 9417497?
There is 1 known substitute for 9417497: 307124-Z. Substitute compatibility should be verified for your specific system.
What is the NSN for 9417497?
9417497 is cataloged in the U.S. Government catalog under NSN 5310-01-510-6029. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9417497

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.