PartsTable
Technical Data Sheet
PartsTable / O-RING / 94152-1
94152-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BOLT,FLUID PASSAGE is a the manufacturer industrial component. Key specifications include material: STEEL, surface_treatment: CADMIUM, width_across_flats: 0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN, wrenching_feature_style: HEXAGON. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-143-8823, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
94152-1
NSN: 5331-00-143-8823
FSC: 5331 — O-RING
CAGE: 42271 — KENOSHA AUTOMOTIVE PLANT SUB OF AMERICAN MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL
surface_treatmentCADMIUM
width_across_flats0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN
wrenching_feature_styleHEXAGON
NSN5331-00-143-8823
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 94152-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.609 INCHES MINIMUM AND 2.665 INCHES MAXIMUM IN
•
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
ELONGATION PERCENTAGE: 331 MAXIMUM
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 2.339 INCHES MINIMUM AND 2.379 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.609 INCHES MINIMUM AND 2.665 INCHES MAXIMUM IN
TEMP RATING-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
ELONGATION PERCENTAGE331 MAXIMUM
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER2.339 INCHES MINIMUM AND 2.379 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
385B207H01Interchangeable
interchangeable cross-reference
interchangeable
SM-B-651053Interchangeable
interchangeable cross-reference
interchangeable
2229Interchangeable
interchangeable cross-reference
interchangeable
K168AInterchangeable
interchangeable cross-reference
interchangeable
S16001Interchangeable
interchangeable cross-reference
interchangeable
7305Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 94152-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 94152-1?
94152-1 is a BOLT,FLUID PASSAGE.
What parts can replace 94152-1?
There are 33 known substitutes for 94152-1: 385B207H01, SM-B-651053, 2229 and 30 more. Substitute compatibility should be verified for your specific system.
Is 94152-1 still available?
94152-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 94152-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026