PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9413498
9413498 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include bore_diameter: 0.2500 INCHES NOMINAL IN, overall_width: 0.1250 INCHES NOMINAL IN, alignment_type: RIGID, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL, overall_outside_diameter: 0.2500 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-807-1711, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9413498
NSN: 3110-00-807-1711
FSC: 3110
CAGE: 72915 — GENERAL MOTORS CORP ELECTRO-MOTIVE DIV (USA)
SPECIFICATIONS
bore_diameter0.2500 INCHES NOMINAL IN
overall_width0.1250 INCHES NOMINAL IN
alignment_typeRIGID
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter0.2500 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-807-1711
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 9413498 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.2500 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 0.2500 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.2500 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.2500 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
OVERALL WIDTH0.1250 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
180228Interchangeable
interchangeable cross-reference
interchangeable
180228PC2Interchangeable
interchangeable cross-reference
interchangeable
180228-2Interchangeable
interchangeable cross-reference
interchangeable
KIPPERInterchangeable
interchangeable cross-reference
interchangeable
A24Interchangeable
interchangeable cross-reference
interchangeable
A2124Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9413498?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9413498?
9413498 is a BEARING,ROLLER,NEEDLE.
What parts can replace 9413498?
There are 17 known substitutes for 9413498: 180228, 180228PC2, 180228-2 and 14 more. Substitute compatibility should be verified for your specific system.
Is 9413498 still available?
9413498 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9413498

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026