PartsTable
Technical Data Sheet
Download PDF

94102-1 — COVER,ACCESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

94102-1: COVER,ACCESS.

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include material: PLASTIC, body_thickness: 0.187 INCHES NOMINAL IN, outside_diameter: 4.062 INCHES NOMINAL IN, bolt_circle_diameter: 3.750 INCHES NOMINAL IN, securing_device_type: THREADED FASTENER, peripheral_shape_style: ROUND, MULTI HOLES. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-088-5402, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
94102-1
NSN: 5340-01-088-5402
FSC: 5340 — Hardware, Commercial
CAGE: 24338 — L3 TECHNOLOGIES, INC. DIV L3HARRIS EDO WESTERN CORPORATION (USA)
SPECIFICATIONS
materialPLASTIC
body_thickness0.187 INCHES NOMINAL IN
outside_diameter4.062 INCHES NOMINAL IN
bolt_circle_diameter3.750 INCHES NOMINAL IN
securing_device_typeTHREADED FASTENER
peripheral_shape_styleROUND, MULTI HOLES
bolt_circle_hole_quantity4
cross-sectional_shape_styleFLAT
material_document_and_classificationMIL-P-5425,FINISH A MIL SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-088-5402
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 94102-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT CIRCLE HOLE QUANTITY: 4
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-5425,FINISH A MIL SPEC SINGLE MATERIAL RESPONSE
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
•
OUTSIDE DIAMETER: 4.062 INCHES NOMINAL IN
•
SECURING DEVICE TYPE: THREADED FASTENER
•
BOLT CIRCLE DIAMETER: 3.750 INCHES NOMINAL IN
•
PERIPHERAL SHAPE STYLE: ROUND, MULTI HOLES
•
MATERIAL: PLASTIC
TECHNICAL CHARACTERISTICS
BOLT CIRCLE HOLE QUANTITY4
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-5425,FINISH A MIL SPEC SINGLE MATERIAL RESPONSE
CROSS-SECTIONAL SHAPE STYLEFLAT
OUTSIDE DIAMETER4.062 INCHES NOMINAL IN
SECURING DEVICE TYPETHREADED FASTENER
BOLT CIRCLE DIAMETER3.750 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLEROUND, MULTI HOLES
MATERIALPLASTIC
BODY THICKNESS0.187 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
94102Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 94102-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 94102-1?
94102-1 is a COVER,ACCESS.
What parts can replace 94102-1?
There is 1 known substitute for 94102-1: 94102. Substitute compatibility should be verified for your specific system.
What is the NSN for 94102-1?
94102-1 is cataloged in the U.S. Government catalog under NSN 5340-01-088-5402. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 94102-1