PartsTable
Technical Data Sheet
Download PDF

9409LPDH1L5 — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9409LPDH1L5: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING SPRING, seal_width: 0.500 INCHES NOMINAL IN, construction: SOLID, special_features: W/SPRING RETAINING FEATURE, housing_bore_diameter: 3.375 INCHES NOMINAL IN, accommodated_shaft_diameter: 2.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-122-7038, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9409LPDH1L5
NSN: 5330-00-122-7038
FSC: 5330 — Packing and Gasket Materials
CAGE: 75165 — JOHNS MANVILLE INTL (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING SPRING
seal_width0.500 INCHES NOMINAL IN
constructionSOLID
special_featuresW/SPRING RETAINING FEATURE
housing_bore_diameter3.375 INCHES NOMINAL IN
accommodated_shaft_diameter2.375 INCHES NOMINAL IN
cross-sectional_shape_styleSINGLE LIP
NSN5330-00-122-7038
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9409LPDH1L5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 3.375 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 2.375 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING SPRING
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.500 INCHES NOMINAL IN
HOUSING BORE DIAMETER3.375 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
SPECIAL FEATURESW/SPRING RETAINING FEATURE
ACCOMMODATED SHAFT DIAMETER2.375 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING SPRING
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CONSTRUCTIONSOLID
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
E106-915-30Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9409LPDH1L5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9409LPDH1L5?
9409LPDH1L5 is a SEAL,PLAIN.
What parts can replace 9409LPDH1L5?
There is 1 known substitute for 9409LPDH1L5: E106-915-30. Substitute compatibility should be verified for your specific system.
What is the NSN for 9409LPDH1L5?
9409LPDH1L5 is cataloged in the U.S. Government catalog under NSN 5330-00-122-7038. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9409LPDH1L5