PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 94034
94034 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include end_item_identification: SEMI-AUTOMATIC SNIPER RIFLE M110, part_name_assigned_by_controlling_agency: SPRING,SAFETY DETENT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-166-1402, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
94034
NSN: 5310-00-166-1402
FSC: 5310
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
end_item_identificationSEMI-AUTOMATIC SNIPER RIFLE M110
part_name_assigned_by_controlling_agencySPRING,SAFETY DETENT
NSN5310-00-166-1402
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 94034 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DRIVE POINT QUANTITY: 8
•
DRILLED HOLE DIAMETER: 0.157 INCHES NOMINAL IN
•
DRIVE POINT DEPTH: 0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
•
HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
•
THREAD SERIES: UNS
•
THREAD QUANTITY PER INCH: 12
•
NOMINAL THREAD SIZE: 0.938 INCHES IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
DRIVE POINT QUANTITY8
DRILLED HOLE DIAMETER0.157 INCHES NOMINAL IN
DRIVE POINT DEPTH0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
THREAD SERIESUNS
THREAD QUANTITY PER INCH12
SPECIAL FEATURESHOLES IN PERIPHERY COUNTERBORED 0.200 IN. DEEP BY 0.298 TO 0.302 IN. DIA IN
NOMINAL THREAD SIZE0.938 INCHES IN
HOLE CONFIGURATION STYLECONFIGURATION F
DRIVE POINT WIDTH0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
12222Interchangeable
interchangeable cross-reference
interchangeable
0565 4406Interchangeable
interchangeable cross-reference
interchangeable
2410 3/4Interchangeable
interchangeable cross-reference
interchangeable
94034Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 94034?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 94034?
94034 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E.
What parts can replace 94034?
There are 4 known substitutes for 94034: 12222, 0565 4406, 2410 3/4 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 94034?
94034 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-166-1402. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 94034

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026