PartsTable
Technical Data Sheet
Download PDF

940122 — NUT,SELF-LOCKING,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

940122: NUT,SELF-LOCKING,PLATE.

The NUT,SELF-LOCKING,PLATE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1137 OVERALL, nut_style: PLATE, nut_height: 0.345 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN, nut_length: 1.266 INCHES MINIMUM AND 1.296 INCHES MAXIMUM IN, plate_width: 0.501 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-997-6834, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
940122
NSN: 5310-00-997-6834
FSC: 5310 — Nuts and Washers
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 1137 OVERALL
nut_stylePLATE
nut_height0.345 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
nut_length1.266 INCHES MINIMUM AND 1.296 INCHES MAXIMUM IN
plate_width0.501 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
thread_seriesUNF
locking_featurePREVAILING TORQUE ALL METAL DESIGN
plate_thickness0.055 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.313 INCHES IN
mounting_hole_diameter0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
NSN5310-00-997-6834
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 940122 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.055 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
•
NUT LENGTH: 1.266 INCHES MINIMUM AND 1.296 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
PLATE WIDTH: 0.501 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
THREAD PITCH DIAMETERS: +0.2720 TO 0.2800 INCHES IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5024 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MOUNTING HOLE DIAMETER: 0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.055 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
NUT LENGTH1.266 INCHES MINIMUM AND 1.296 INCHES MAXIMUM IN
THREAD SERIESUNF
PLATE WIDTH0.501 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
THREAD PITCH DIAMETERS+0.2720 TO 0.2800 INCHES IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5024 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MOUNTING HOLE DIAMETER0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.313 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 2
D52ZA6642-054Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
490122Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 940122?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 940122?
940122 is a NUT,SELF-LOCKING,PLATE.
What parts can replace 940122?
There are 2 known substitutes for 940122: D52ZA6642-054, 490122. Substitute compatibility should be verified for your specific system.
What is the NSN for 940122?
940122 is cataloged in the U.S. Government catalog under NSN 5310-00-997-6834. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 940122

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.