PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 940.83.28.607
940.83.28.607 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The 940.83.28.607 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-142-4313, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
940.83.28.607
NSN: 3110-00-142-4313
FSC: 3110
CAGE: S4080 — PILATUS AIRCRAFT LTD (CHE)
SPECIFICATIONS
Part Number940.83.28.607
NSN3110-00-142-4313
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 940.83.28.607 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: RADIAL
•
ALIGNMENT TYPE: SELF-ALIGNING
•
SELF-ALIGNMENT LOCATION: INTERNAL
•
SHIELD QUANTITY: 2
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
OUTER RING WIDTH: 0.2650 INCHES MINIMUM AND 0.2700 INCHES MAXIMUM IN
•
INNER RING WIDTH: 0.2920 INCHES MINIMUM AND 0.2970 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONRADIAL
SPECIAL FEATURES10.0 DEGREE SELF ALIGNMENT IN EITHER DIRECTION
ALIGNMENT TYPESELF-ALIGNING
SELF-ALIGNMENT LOCATIONINTERNAL
SHIELD QUANTITY2
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
OUTER RING WIDTH0.2650 INCHES MINIMUM AND 0.2700 INCHES MAXIMUM IN
INNER RING WIDTH0.2920 INCHES MINIMUM AND 0.2970 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.7769 INCHES MINIMUM AND 0.7774 INCHES MAXIMUM IN
MATERIALSTEEL OR STEEL CORROSION RESISTING SHIELD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
KSP10FS464Interchangeable
interchangeable cross-reference
interchangeable
AS27645Interchangeable
interchangeable cross-reference
interchangeable
SAE AS27645Interchangeable
interchangeable cross-reference
interchangeable
MS27645-3AInterchangeable
interchangeable cross-reference
interchangeable
KSP3LFS464Interchangeable
interchangeable cross-reference
interchangeable
KSP3LInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 940.83.28.607?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 940.83.28.607?
940.83.28.607 is a 940.83.28.607.
What parts can replace 940.83.28.607?
There are 29 known substitutes for 940.83.28.607: KSP10FS464, AS27645, SAE AS27645 and 26 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 940.83.28.607?
940.83.28.607 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-142-4313. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 940.83.28.607

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026