PartsTable
Technical Data Sheet
PartsTable / MRO / 940-42
940-42 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FILTER,BAND PASS is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, body_width: 1.252 INCHES NOMINAL IN, ring_style: CONCENTRIC, body_height: 2.938 INCHES NOMINAL IN, body_length: 1.752 INCHES NOMINAL IN, body_material: METAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-211-5052, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 940-42
NSN: 5330-00-211-5052
FSC: 5330
CAGE: 30781 — PARKER-HANNIFIN CORPORATION DIV ENGINEERED POLYMER SYSTEMS DIVISION (EPS) (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
body_width1.252 INCHES NOMINAL IN
ring_styleCONCENTRIC
body_height2.938 INCHES NOMINAL IN
body_length1.752 INCHES NOMINAL IN
body_materialMETAL
inclosure_typeENCASED
overall_height3.813 INCHES NOMINAL IN
overall_length2.502 INCHES NOMINAL IN
inside_diameter4.687 INCHES NOMINAL IN
outside_diameter5.060 INCHES NOMINAL IN
style_designatorRECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES
NSN5330-00-211-5052
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 940-42 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RING STYLE: CONCENTRIC
•
OUTER EDGE THICKNESS: 0.130 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: OUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
•
MATERIAL: UNABLE TO DECODE
•
MATERIAL THICKNESS: 0.225 INCHES NOMINAL IN
•
INSIDE DIAMETER: 4.687 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 5.060 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
RING STYLECONCENTRIC
OUTER EDGE THICKNESS0.130 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEOUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
MATERIALUNABLE TO DECODE
MATERIAL THICKNESS0.225 INCHES NOMINAL IN
INSIDE DIAMETER4.687 INCHES NOMINAL IN
OUTSIDE DIAMETER5.060 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
271970PC2Interchangeable
interchangeable cross-reference
interchangeable
94042Interchangeable
interchangeable cross-reference
interchangeable
7107V843PC2Interchangeable
interchangeable cross-reference
interchangeable
2920137-042Interchangeable
interchangeable cross-reference
interchangeable
2920137-42Interchangeable
interchangeable cross-reference
interchangeable
0072306724Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 940-42?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 940-42?
940-42 is a FILTER,BAND PASS. It is classified as a MRO (MRO_GENERAL).
What parts can replace 940-42?
There are 7 known substitutes for 940-42: 271970PC2, 94042, 7107V843PC2 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 940-42?
940-42 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-211-5052. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 940-42

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026