PartsTable
Technical Data Sheet
PartsTable / MRO / 940-13
940-13 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The FILTER,BAND PASS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.035 INCHES NOMINAL IN, body_width: 1.252 INCHES NOMINAL IN, body_height: 2.938 INCHES NOMINAL IN, body_length: 1.752 INCHES NOMINAL IN, body_material: METAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-187-2351, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 940-13
NSN: 5310-00-187-2351
FSC: 5310
CAGE: 80049 — DEPARTMENT OF THE AIR FORCE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.035 INCHES NOMINAL IN
body_width1.252 INCHES NOMINAL IN
body_height2.938 INCHES NOMINAL IN
body_length1.752 INCHES NOMINAL IN
body_materialMETAL
hole_diameter0.093 INCHES NOMINAL IN
document_titleGO AWAY BIG GREEN MONSTER
inclosure_typeENCASED
overall_length2.502 INCHES NOMINAL IN
overall_diameter0.375 INCHES NOMINAL IN
style_designatorRECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES
NSN5310-00-187-2351
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 940-13 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.375 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
THICKNESS: 0.035 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.093 INCHES NOMINAL IN
•
CENTER HOLE SHAPE STYLE: ROUND
•
SURFACE TREATMENT: TIN OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DIAMETER0.375 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.035 INCHES NOMINAL IN
HOLE DIAMETER0.093 INCHES NOMINAL IN
CENTER HOLE SHAPE STYLEROUND
SURFACE TREATMENTTIN OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
2920137-13Interchangeable
interchangeable cross-reference
interchangeable
F12675-13Interchangeable
interchangeable cross-reference
interchangeable
2920137-013Interchangeable
interchangeable cross-reference
interchangeable
94013Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 940-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 940-13?
940-13 is a FILTER,BAND PASS. It is classified as a MRO (MRO_GENERAL).
What parts can replace 940-13?
There are 4 known substitutes for 940-13: 2920137-13, F12675-13, 2920137-013 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 940-13?
940-13 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-187-2351. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 940-13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026