PartsTable
Technical Data Sheet

940 15/16 — ENGINE BLOCK ASSEMBLY,GASOLINE

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

940 15/16: ENGINE BLOCK ASSEMBLY,GASOLINE.

The ENGINE BLOCK ASSEMBLY,GASOLINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL, shank_style: STANDARD TAPER W/TANG, flute_length: 8.625 INCHES NOMINAL IN, overall_length: 14.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5133-00-228-1345, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
940 15/16
NSN: 5133-00-228-1345
NIINs: 002281345, 002281369
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 13130 — CLEVELAND TWIST DRILL CO DIV OF GREENFIELD INDUSTRIES INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
flute_length8.625 INCHES NOMINAL IN
flute_quantity2
overall_length14.250 INCHES NOMINAL IN
special_featuresTAPER SHANK LG; FRACTIONAL SIZE 1-5/16
cutting_end_styleGENERAL PURPOSE
nominal_cutting_diameter1.3125 INCHES IN
cutting_rotation_directionRIGHT-HAND
specification/standard_data05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN5133-00-228-1345
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available ENGINE BLOCK ASSEMBLY,GASOLINE TITLE COMPONENT PN 940 15/16 MFR ENGINE BLOCK ASSEMBLY,
KEY FEATURES
•
CUTTING END STYLE: GENERAL PURPOSE
•
TAPER SHANK SIZE DESIGNATOR: 3 MORSE
•
FLUTE LENGTH: 6.125 INCHES NOMINAL IN
•
NOMINAL CUTTING DIAMETER: 0.9375 INCHES IN
•
CUTTING ROTATION DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
SHANK STYLE: STANDARD TAPER W/TANG
TECHNICAL CHARACTERISTICS
CUTTING END STYLEGENERAL PURPOSE
TAPER SHANK SIZE DESIGNATOR3 MORSE
FLUTE LENGTH6.125 INCHES NOMINAL IN
OVERALL LENGTH10.750 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER0.9375 INCHES IN
CUTTING ROTATION DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SHANK STYLESTANDARD TAPER W/TANG
FLUTE QUANTITY2
SPECIAL FEATURESTAPER SHANK LG; FRACTIONAL SIZE 15/16
SUBSTITUTES & CROSS-REFERENCES 7
53160Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
GGG-D-751Reference document
Same NSN cross-reference
Reference document — Secondary reference
C12243Reference document
Same NSN cross-reference
Reference document — Secondary reference
110 15/16Reference document
Same NSN cross-reference
Reference document — Secondary reference
29373Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
GGG-D-751 TYESZ1-5/16Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 940 15/16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 940 15/16?
940 15/16 is a ENGINE BLOCK ASSEMBLY,GASOLINE.
What parts can replace 940 15/16?
There are 7 known substitutes for 940 15/16: 53160, GGG-D-751, C12243 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 940 15/16?
940 15/16 is cataloged in the U.S. Government catalog under NSN 5133-00-228-1345. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 940 15/16