PartsTable
Technical Data Sheet
Download PDF

94-462-1 — 94-462-1

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

94-462-1: 94-462-1.

The 94-462-1 is a the manufacturer industrial component. Key specifications include material: PLASTIC, movement_type: MOVING COIL, PERMANENT MAGNET, overall_width: 3.000 INCHES NOMINAL IN, overall_height: 2.250 INCHES NOMINAL IN, overall_length: 1.969 INCHES NOMINAL IN, style_designator: RECTANGULAR FLUSH MTG. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-382-1710, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 94-462-1
NSN: 5340-00-382-1710
NIINs: 003821710, 007317501, 010276856
FSC: 5340 — Hardware, Commercial
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialPLASTIC
movement_typeMOVING COIL, PERMANENT MAGNET
overall_width3.000 INCHES NOMINAL IN
overall_height2.250 INCHES NOMINAL IN
overall_length1.969 INCHES NOMINAL IN
style_designatorRECTANGULAR FLUSH MTG
measurement_range+0.0 TO 5.0 AMPERES, DC SINGLE INDICATOR SINGLE RANGE
accuracy_in_percent-2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE
installation_designPANEL
mounting_stud_length0.437 INCHES NOMINAL IN
mounting_stud_diameter0.128 INCHES NOMINAL IN
dial_scale_marking_colorBLACK SINGLE INDICATOR SINGLE RANGE
NSN5340-00-382-1710
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 94-462-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CENTER MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.097 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.137 INCHES NOMINAL IN
•
SURFACE TREATMENT: PAINT BAND
•
INTEGRAL NUT TYPE AND QUANTITY: 1 PLAIN EQUAL LENGTH TONGUES
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORCENTER MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.097 INCHES NOMINAL IN
OVERALL WIDTH0.188 INCHES NOMINAL IN
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.137 INCHES NOMINAL IN
SURFACE TREATMENTPAINT BAND
INTEGRAL NUT TYPE AND QUANTITY1 PLAIN EQUAL LENGTH TONGUES
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.031 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
9240-003-84Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 94-462-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 94-462-1?
94-462-1 is a 94-462-1. It is classified as a MRO (MRO_GENERAL).
What parts can replace 94-462-1?
There is 1 known substitute for 94-462-1: 9240-003-84. Substitute compatibility should be verified for your specific system.
What is the NSN for 94-462-1?
94-462-1 is cataloged in the U.S. Government catalog under NSN 5340-00-382-1710. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 94-462-1