PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 94-210
94-210 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The SPRING,LEAF is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.411 INCHES NOMINAL IN, thread_length: 0.373 INCHES NOMINAL IN, fastener_length: 0.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-272-6751, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
94-210
NSN: 5315-00-272-6751
FSC: 5315
CAGE: 61822 — AMCA INTL CORP UNIT CRANE DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.411 INCHES NOMINAL IN
thread_length0.373 INCHES NOMINAL IN
fastener_length0.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle82.0 DEGREES NOMINAL
width_across_flats0.125 INCHES NOMINAL IN
internal_drive_styleHEXAGON
end_item_identification2350-01-458-7318
nominal_thread_diameter0.190 INCHES IN
NSN5315-00-272-6751
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 94-210 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: ROUND
•
HEIGHT: 0.625 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
DIAMETER: 0.750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.438 INCHES NOMINAL IN
•
PIN HEAD DIAMETER: 1.312 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEROUND
HEIGHT0.625 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
DIAMETER0.750 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.438 INCHES NOMINAL IN
PIN HEAD DIAMETER1.312 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH3.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
35C1267Interchangeable
interchangeable cross-reference
interchangeable
13-206Interchangeable
interchangeable cross-reference
interchangeable
100143Interchangeable
interchangeable cross-reference
interchangeable
13049Interchangeable
interchangeable cross-reference
interchangeable
P-7600Interchangeable
interchangeable cross-reference
interchangeable
03744Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 94-210?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 94-210?
94-210 is a SPRING,LEAF.
What parts can replace 94-210?
There are 14 known substitutes for 94-210: 35C1267, 13-206, 100143 and 11 more. Substitute compatibility should be verified for your specific system.
Is 94-210 still available?
94-210 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 94-210

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026