PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 94-0005-06
94-0005-06 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING,PLAIN,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include material: LUBRICANT DRY FILM LUBRICATION, bore_diameter: 0.3740 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, hardness_rating: 55.0 ROCKWELL C NOMINAL INNER MEMBER, style_designator: WITH INSERT AND/OR LINER WITH STAKING GROOVE, surface_treatment: CHROMIUM INNER MEMBER, inner_member_width: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-01-040-4865, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
94-0005-06
NSN: 3120-01-040-4865
FSC: 3120
CAGE: 77896 — REXNORD INDUSTRIES, LLC DIV AEROSSPACE BEARING OPERATION (USA)
SPECIFICATIONS
materialLUBRICANT DRY FILM LUBRICATION
bore_diameter0.3740 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
hardness_rating55.0 ROCKWELL C NOMINAL INNER MEMBER
style_designatorWITH INSERT AND/OR LINER WITH STAKING GROOVE
surface_treatmentCHROMIUM INNER MEMBER
inner_member_width0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
outer_member_width0.4010 INCHES MINIMUM AND 0.4110 INCHES MAXIMUM IN
static_radial_load_rating10000 POUNDS LBS
outer_member_outside_diameter0.8120 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM IN
material_document_and_classificationMIL-L-46010 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
NSN3120-01-040-4865
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 94-0005-06 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.3740 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
•
STATIC RADIAL LOAD RATING: 10000 POUNDS LBS
•
INNER MEMBER WIDTH: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
OUTER MEMBER OUTSIDE DIAMETER: 0.8120 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM IN
•
OUTER MEMBER WIDTH: 0.4010 INCHES MINIMUM AND 0.4110 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: WITH INSERT AND/OR LINER WITH STAKING GROOVE
•
MATERIAL: STEEL COMP 440C INNER MEMBER
•
SURFACE TREATMENT: CHROMIUM INNER MEMBER
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.3740 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
STATIC RADIAL LOAD RATING10000 POUNDS LBS
INNER MEMBER WIDTH0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
OUTER MEMBER OUTSIDE DIAMETER0.8120 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM IN
OUTER MEMBER WIDTH0.4010 INCHES MINIMUM AND 0.4110 INCHES MAXIMUM IN
STYLE DESIGNATORWITH INSERT AND/OR LINER WITH STAKING GROOVE
MATERIALSTEEL COMP 440C INNER MEMBER
SURFACE TREATMENTCHROMIUM INNER MEMBER
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE BORE LINER
HARDNESS RATING28.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OUTER RACE MEMBER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
56102Interchangeable
interchangeable cross-reference
interchangeable
70525C1Interchangeable
interchangeable cross-reference
interchangeable
PWA56102Interchangeable
interchangeable cross-reference
interchangeable
40300-1Interchangeable
interchangeable cross-reference
interchangeable
561-03Interchangeable
interchangeable cross-reference
interchangeable
40107-2 PIECE 23Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 94-0005-06?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 94-0005-06?
94-0005-06 is a BEARING,PLAIN,SELF-ALIGNING.
What parts can replace 94-0005-06?
There are 7 known substitutes for 94-0005-06: 56102, 70525C1, PWA56102 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 94-0005-06?
94-0005-06 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-01-040-4865. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 94-0005-06

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026