Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include construction: SOLID, end_cut_angle: 45.0 DEGREES, overall_length: 20.281 INCHES MINIMUM AND 20.375 INCHES MAXIMUM IN, style_designator: STRIP, fabrication_method: SOLID, cross-sectional_width: 0.812 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-737-2720, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
93E16
NSN:5330-00-737-2720 FSC:5330 CAGE:56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
material
RUBBER ETHYLENE-PROPYLENE CLASS EPM OR RUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR OVERALL
construction
SOLID
end_cut_angle
45.0 DEGREES
overall_length
20.281 INCHES MINIMUM AND 20.375 INCHES MAXIMUM IN
style_designator
STRIP
fabrication_method
SOLID
cross-sectional_width
0.812 INCHES NOMINAL IN
cross-sectional_height
0.688 INCHES NOMINAL IN
material_document_and_classification
ASTM D2000 3BA720 ASSN STD ALL MATERIAL RESPONSES OVERALL
NSN
5330-00-737-2720
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL WIDTH: 0.812 INCHES NOMINAL IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM OR RUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR OVERALL
•
FABRICATION METHOD: SOLID
•
CONSTRUCTION: SOLID
•
END CUT ANGLE: 45.0 DEGREES
•
STYLE DESIGNATOR: STRIP
•
CROSS-SECTIONAL HEIGHT: 0.688 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL WIDTH
0.812 INCHES NOMINAL IN
MATERIAL
RUBBER ETHYLENE-PROPYLENE CLASS EPM OR RUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR OVERALL
FABRICATION METHOD
SOLID
CONSTRUCTION
SOLID
END CUT ANGLE
45.0 DEGREES
STYLE DESIGNATOR
STRIP
OVERALL LENGTH
20.281 INCHES MINIMUM AND 20.375 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT
0.688 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION
ASTM D2000 3BA720 ASSN STD ALL MATERIAL RESPONSES OVERALL