PartsTable
Technical Data Sheet
Download PDF

9399M32P16 — CLAMP,BLOCK

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9399M32P16: CLAMP,BLOCK.

The CLAMP,BLOCK is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, block_height: 0.642 INCHES NOMINAL0.642 INCHES NOMINAL IN, overall_width: 0.480 INCHES MINIMUM AND 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM0.520 INCHES MAXIMUM IN, overall_height: 1.284 INCHES NOMINAL1.284 INCHES NOMINAL IN, overall_length: 1.550 INCHES MINIMUM AND 1.550 INCHES MINIMUM AND 1.590 INCHES MAXIMUM1.590 INCHES MAXIMUM IN, style_designator: RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-289-7872, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9399M32P16
NSN: 5340-01-289-7872
FSC: 5340 — Hardware, Commercial
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061
block_height0.642 INCHES NOMINAL0.642 INCHES NOMINAL IN
overall_width0.480 INCHES MINIMUM AND 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM0.520 INCHES MAXIMUM IN
overall_height1.284 INCHES NOMINAL1.284 INCHES NOMINAL IN
overall_length1.550 INCHES MINIMUM AND 1.550 INCHES MINIMUM AND 1.590 INCHES MAXIMUM1.590 INCHES MAXIMUM IN
style_designatorRECTANGULAR
mounting_facilityUNTHREADED HOLE(S)UNTHREADED HOLE(S)
surface_treatmentANODIZE
clamping_hole_diameter1.038 INCHES MINIMUM AND 1.058 INCHES MAXIMUM ALL HOLES IN
clamping_hole_quantity11
mounting_hole_diameter0.231 INCHES MINIMUM AND 0.231 INCHES MINIMUM AND 0.239 INCHES MAXIMUM0.239 INCHES MAXIMUM IN
mounting_hole_quantity11
NSN5340-01-289-7872
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9399M32P16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 11
•
CLAMPING HOLE QUANTITY: 11
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 1.000 INCHES NOMINAL IN
•
BLOCK HEIGHT: 0.642 INCHES NOMINAL0.642 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4117 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4150 ASSN STD SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.231 INCHES MINIMUM AND 0.231 INCHES MINIMUM AND 0.239 INCHES MAXIMUM0.239 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY11
OVERALL HEIGHT1.284 INCHES NOMINAL1.284 INCHES NOMINAL IN
CLAMPING HOLE QUANTITY11
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER1.000 INCHES NOMINAL IN
BLOCK HEIGHT0.642 INCHES NOMINAL0.642 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4117 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4150 ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.231 INCHES MINIMUM AND 0.231 INCHES MINIMUM AND 0.239 INCHES MAXIMUM0.239 INCHES MAXIMUM IN
OVERALL LENGTH1.550 INCHES MINIMUM AND 1.550 INCHES MINIMUM AND 1.590 INCHES MAXIMUM1.590 INCHES MAXIMUM IN
OVERALL WIDTH0.480 INCHES MINIMUM AND 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM0.520 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9399M32P16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9399M32P16?
9399M32P16 is a CLAMP,BLOCK.
What is the NSN for 9399M32P16?
9399M32P16 is cataloged in the U.S. Government catalog under NSN 5340-01-289-7872. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9399M32P16

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.