PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9395-6
9395-6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include material: ASBESTOS AND RUBBER SYNTHETIC OVERALL, hole_diameter: 0.344 INCHES MINIMUM AND 0.500 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.437 INCHES NOMINAL IN, overall_length: 3.609 INCHES NOMINAL IN, fsc_application_data: ENGINE,AIRCRAFT,RECIPROCATING, cross-sectional_thickness: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-118-5378, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9395-6
NSN: 5330-00-118-5378
FSC: 5330
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
materialASBESTOS AND RUBBER SYNTHETIC OVERALL
hole_diameter0.344 INCHES MINIMUM AND 0.500 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.437 INCHES NOMINAL IN
overall_length3.609 INCHES NOMINAL IN
fsc_application_dataENGINE,AIRCRAFT,RECIPROCATING
cross-sectional_thickness0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationAMS 3232 ASSN STD ALL MATERIAL RESPONSES OVERALL
NSN5330-00-118-5378
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9395-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3232 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
HOLE DIAMETER: 0.344 INCHES MINIMUM AND 0.500 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
FSC APPLICATION DATA: ENGINE,AIRCRAFT,RECIPROCATING
•
CROSS-SECTIONAL THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
MATERIAL: ASBESTOS AND RUBBER SYNTHETIC OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3232 ASSN STD ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH3.609 INCHES NOMINAL IN
OVERALL WIDTH3.437 INCHES NOMINAL IN
HOLE DIAMETER0.344 INCHES MINIMUM AND 0.500 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
FSC APPLICATION DATAENGINE,AIRCRAFT,RECIPROCATING
CROSS-SECTIONAL THICKNESS0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
MATERIALASBESTOS AND RUBBER SYNTHETIC OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
716-029319Interchangeable
interchangeable cross-reference
interchangeable
AS22Interchangeable
interchangeable cross-reference
interchangeable
700 5/8Interchangeable
interchangeable cross-reference
interchangeable
93956Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9395-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9395-6?
9395-6 is a RESISTOR,VARIABLE,NONWIRE WOUND,.
What parts can replace 9395-6?
There are 4 known substitutes for 9395-6: 716-029319, AS22, 700 5/8 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9395-6?
9395-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-118-5378. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9395-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026