The Nonmetallic Channel, cataloged under National Stock Number 9390-01-280-3410, is classified within Federal Supply Class 9390 (Miscellaneous Fabricated Nonmetallic Materials) of the Nonmetallic Fabricated Materials group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 9390-01-280-3410 |
| Item Name | Nonmetallic Channel |
| FSC / FSG | 9390 / 93 — Miscellaneous Fabricated Nonmetallic Materials |
| Status | ACTIVE |
| Base Flange Thickness | 0.250 INCHES NOMINAL IN |
| Minimum Tensile Strength | ERR-060 |
| Left-Side Flange Tip Style | LEFT SQUARE END |
| Material Document and Classification | MIL-R-6855, CLASS 2, TYPE A, GRADE 60 MIL SPEC SINGLE MATERIAL RESPONSE |
| Cross-Sectional Shape Style | OPEN CHANNEL |
| Left Side Flange Thickness | 0.125 INCHES NOMINAL IN |
| Right Side Flange Height | 0.125 INCHES NOMINAL IN |
| Right Side Flange Thickness | 0.125 INCHES NOMINAL IN |
| Environmental Protection | PETROLEUM AND LOW TEMPERATURE AND OZONE RESISTANT AND WEATHER RESISTANT |
| Material | RUBBER SYNTHETIC |
| Nonmetallic Hardness Rating | 60.0 NOMINAL SHORE DUROMETER A |
| Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY LENGTH,MATERIAL AND NONMETALLIC HARDNESS RATING |
| Right-Side Flange Tip Style | RIGHT SQUARE END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| ZX4555 | 3/1 Design control — primary reference Minor Rubber Co Inc |
| MIL-R-6855 | 4/1 Identification reference U.S. Government activity |
NSN 9390-01-280-3410 is a Nonmetallic Channel, classified under FSC 9390, Miscellaneous Fabricated Nonmetallic Materials. Status: active.
Key specifications for 9390-01-280-3410: Overall Height: 0.375 INCHES NOMINAL IN; Base Flange Thickness: 0.250 INCHES NOMINAL IN; Minimum Tensile Strength: ERR-060; Left-Side Flange Tip Style: LEFT SQUARE END. 13 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.