The Nonmetallic Special Shaped Secti, cataloged under National Stock Number 9390-01-044-3695, is classified within Federal Supply Class 9390 (Miscellaneous Fabricated Nonmetallic Materials) of the Nonmetallic Fabricated Materials group. The manufacturer of record is The Boeing Company Div Defense. Government technical data includes 12 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 9390-01-044-3695 |
| Primary Part Number | 11M961-1 |
| Item Name | Nonmetallic Special Shaped Secti |
| FSC / FSG | 9390 / 93 — Miscellaneous Fabricated Nonmetallic Materials |
| Manufacturer | The Boeing Company Div Defense |
| Status | ACTIVE |
| First/top Flange Thickness | 0.120 INCHES NOMINAL IN |
| Length | 75.000 INCHES MINIMUM IN |
| Minimum Tensile Strength | ERR-060 |
| First Fillet Radius | 0.030 INCHES NOMINAL IN |
| First Offset Height | 0.128 INCHES NOMINAL IN |
| Cross-Sectional Shape Style | ROUND, HOLLOW CORE |
| Second Fillet Radius | 0.030 INCHES NOMINAL IN |
| Outside Radius | 0.375 INCHES NOMINAL IN |
| Environmental Protection | FLEX RESISTANT AND TEAR RESISTANT |
| Material | RUBBER SILICONE CLASS Q |
| Nonmetallic Hardness Rating | 50.0 NOMINAL SHORE DUROMETER A |
| Inside Radius | 0.295 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 11M961-1 PRIMARY | The Boeing Company Div Defense (USA) |
NSN 9390-01-044-3695 is a Nonmetallic Special Shaped Secti, manufactured by The Boeing Company Div Defense, classified under FSC 9390, Miscellaneous Fabricated Nonmetallic Materials. Status: active.
NSN 9390-01-044-3695 has 1 manufacturer part number on file: 11M961-1 (The Boeing Company Div Defense).
Key specifications for 11M961-1: First/top Flange Thickness: 0.120 INCHES NOMINAL IN; Length: 75.000 INCHES MINIMUM IN; Minimum Tensile Strength: ERR-060; First Fillet Radius: 0.030 INCHES NOMINAL IN. 12 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.