PartsTable
Technical Data Sheet
Download PDF

9387511202 — WASHER,RECESSED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9387511202: WASHER,RECESSED.

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, hole_diameter: 0.314 INCHES MINIMUM AND 0.318 INCHES MAXIMUM IN, hardness_rating: 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM, outside_diameter: 0.610 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN, style_designator: RECESSED BOTH SIDES, top_recess_angle: 90.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-066-9076, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9387511202
NSN: 5310-01-066-9076
FSC: 5310 — Nuts and Washers
CAGE: S4080 — PILATUS AIRCRAFT LTD (CHE)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
hole_diameter0.314 INCHES MINIMUM AND 0.318 INCHES MAXIMUM IN
hardness_rating39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
outside_diameter0.610 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
style_designatorRECESSED BOTH SIDES
top_recess_angle90.0 DEGREES NOMINAL
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.114 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
bottom_recess_angle90.0 DEGREES NOMINAL
top_recess_diameter0.399 INCHES MINIMUM AND 0.409 INCHES MAXIMUM IN
bottom_recess_diameter0.399 INCHES MINIMUM AND 0.409 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-5059,TY 302,1/2 HARD MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
NSN5310-01-066-9076
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9387511202 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TOP RECESS DIAMETER: 0.399 INCHES MINIMUM AND 0.409 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
BOTTOM RECESS DIAMETER: 0.399 INCHES MINIMUM AND 0.409 INCHES MAXIMUM IN
•
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
•
TOP RECESS ANGLE: 90.0 DEGREES NOMINAL
•
STYLE DESIGNATOR: RECESSED BOTH SIDES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059,TY 302,1/2 HARD MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.610 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
TOP RECESS DIAMETER0.399 INCHES MINIMUM AND 0.409 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
BOTTOM RECESS DIAMETER0.399 INCHES MINIMUM AND 0.409 INCHES MAXIMUM IN
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
TOP RECESS ANGLE90.0 DEGREES NOMINAL
STYLE DESIGNATORRECESSED BOTH SIDES
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059,TY 302,1/2 HARD MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.610 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
MATERIAL THICKNESS0.114 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
BOTTOM RECESS ANGLE90.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 3
5310PL1939943Reference document
Same NSN cross-reference
Reference document — Informative reference only
MS14155-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
10368745Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 9387511202?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9387511202?
9387511202 is a WASHER,RECESSED.
What parts can replace 9387511202?
There are 3 known substitutes for 9387511202: 5310PL1939943, MS14155-5, 10368745. Substitute compatibility should be verified for your specific system.
What is the NSN for 9387511202?
9387511202 is cataloged in the U.S. Government catalog under NSN 5310-01-066-9076. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9387511202

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.