PartsTable
Technical Data Sheet
Download PDF

9380390 — CONNECTOR,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9380390: CONNECTOR,ROD END.

The CONNECTOR,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, thread_class: 2A ROD CONNECTION A, thread_length: 0.625 INCHES NOMINAL ROD CONNECTION IN, special_features: PROTECTIVE FINISH PER PARAGRAPH 2.1,EXTERIOR PAINT SYSTEM,DWG 19207-12350824 EXCEPT WAIVE PRETREATING, thread_direction: RIGHT-HAND ROD CONNECTION, surface_treatment: CHROMIUM AND CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-312-1023, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9380390
NSN: 5340-01-312-1023
FSC: 5340 — Hardware, Commercial
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
thread_class2A ROD CONNECTION A
thread_length0.625 INCHES NOMINAL ROD CONNECTION IN
special_featuresPROTECTIVE FINISH PER PARAGRAPH 2.1,EXTERIOR PAINT SYSTEM,DWG 19207-12350824 EXCEPT WAIVE PRETREATING
thread_directionRIGHT-HAND ROD CONNECTION
surface_treatmentCHROMIUM AND CHROMATE OVERALL
nominal_thread_size0.625 INCHES ROD CONNECTION IN
end_item_identificationUSED ON M2A1/M3A1
metallic_hardness_rating28.0 MINIMUM ROCKWELL C AND 36.0 MAXIMUM ROCKWELL C
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) ROD CONNECTION
securing_pin_hole_diameter0.505 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
rod_connection_bore_diameter0.480 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
NSN5340-01-312-1023
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9380390 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECURING PIN HOLE DIAMETER: 0.505 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.625 INCHES NOMINAL ROD CONNECTION IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
•
NOMINAL THREAD SIZE: 0.625 INCHES ROD CONNECTION IN
•
SURFACE TREATMENT: CHROMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
SECURING PIN HOLE DIAMETER0.505 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.625 INCHES NOMINAL ROD CONNECTION IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE0.625 INCHES ROD CONNECTION IN
SPECIAL FEATURESPROTECTIVE FINISH PER PARAGRAPH 2.1,EXTERIOR PAINT SYSTEM,DWG 19207-12350824 EXCEPT WAIVE PRETREATING
SURFACE TREATMENTCHROMIUM AND CHROMATE OVERALL
ROD CONNECTION BORE DIAMETER0.480 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
THREAD CLASS2A ROD CONNECTION A
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9380390?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9380390?
9380390 is a CONNECTOR,ROD END.
What is the NSN for 9380390?
9380390 is cataloged in the U.S. Government catalog under NSN 5340-01-312-1023. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9380390

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.