PartsTable
Technical Data Sheet
Download PDF

938.07.68.305 — NUT,SELF-LOCKING,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

938.07.68.305: NUT,SELF-LOCKING,HEXAGON.

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.208 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN, lubrication: SOLUBLE LUBRICANT, temp_rating: 450.0 FAHRENHEIT NOMINAL DEGF, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-416-3004, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
938.07.68.305
NSN: 5310-01-416-3004
FSC: 5310 — Nuts and Washers
CAGE: S4080 — PILATUS AIRCRAFT LTD (CHE)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.208 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
lubricationSOLUBLE LUBRICANT
temp_rating450.0 FAHRENHEIT NOMINAL DEGF
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
locking_featurePREVAILING TORQUE ALL METAL DESIGN
special_featuresELLIPTICAL LOCK
thread_directionRIGHT-HAND
countersink_angle88.0 DEGREES NOMINAL NUT
surface_treatmentCADMIUM AND CHROMATE OVERALL
NSN5310-01-416-3004
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 938.07.68.305 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: SOLUBLE LUBRICANT
•
WIDTH ACROSS FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416, TY2, CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
TEMP RATING: 450.0 FAHRENHEIT NOMINAL DEGF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
TECHNICAL CHARACTERISTICS
LUBRICATIONSOLUBLE LUBRICANT
WIDTH ACROSS FLATS0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416, TY2, CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
TEMP RATING450.0 FAHRENHEIT NOMINAL DEGF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
NUT HEIGHT0.208 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
SPECIAL FEATURESELLIPTICAL LOCK
SUBSTITUTES & CROSS-REFERENCES 2
10445485Reference document
Same NSN cross-reference
Reference document — Informative reference only
MS21045-4ESame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 938.07.68.305?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 938.07.68.305?
938.07.68.305 is a NUT,SELF-LOCKING,HEXAGON.
What parts can replace 938.07.68.305?
There are 2 known substitutes for 938.07.68.305: 10445485, MS21045-4E. Substitute compatibility should be verified for your specific system.
What is the NSN for 938.07.68.305?
938.07.68.305 is cataloged in the U.S. Government catalog under NSN 5310-01-416-3004. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 938.07.68.305

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.