PartsTable
Technical Data Sheet
Download PDF

9376922 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9376922: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.080 INCHES NOMINAL IN, diameter: 0.188 INCHES NOMINAL IN, material: STEEL COMP 4140 AND STEEL COMP 8640 OVERALL, head_style: FLAT, chamfer_length: 0.060 INCHES NOMINAL IN, hardness_rating: 32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-209-8523, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9376922
NSN: 5315-01-209-8523
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
height0.080 INCHES NOMINAL IN
diameter0.188 INCHES NOMINAL IN
materialSTEEL COMP 4140 AND STEEL COMP 8640 OVERALL
head_styleFLAT
chamfer_length0.060 INCHES NOMINAL IN
hardness_rating32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSTRAIGHT
pin_chamfer_angle15.0 DEGREES NOMINAL
pin_head_diameter0.320 INCHES NOMINAL IN
surface_treatmentPHOSPHATE MANGANESE OR PHOSPHATE ZINC AND LUBRICANT OVERALL
under_head_length2.200 INCHES NOMINAL IN
first_hole_diameter0.065 INCHES NOMINAL IN
NSN5315-01-209-8523
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9376922 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.060 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-P-16232 TYPE M CLASS 3 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-P-16232 TYPE Z CLASS 3 MIL SPEC 2ND TREATMENT RESPONSE AND MIL-L-46010 MIL SPEC 3RD TREATMENT RESPONSE OVERALL
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 2.200 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.065 INCHES NOMINAL IN
•
HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: STRAIGHT
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.060 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-16232 TYPE M CLASS 3 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-P-16232 TYPE Z CLASS 3 MIL SPEC 2ND TREATMENT RESPONSE AND MIL-L-46010 MIL SPEC 3RD TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH2.200 INCHES NOMINAL IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.065 INCHES NOMINAL IN
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.320 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM-A331 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 9376922?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9376922?
9376922 is a PIN,STRAIGHT,HEADED.
What is the NSN for 9376922?
9376922 is cataloged in the U.S. Government catalog under NSN 5315-01-209-8523. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9376922

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.