9375599 — MOTOR,HYDRAULIC

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

9375599: MOTOR,HYDRAULIC.

The MOTOR,HYDRAULIC is a the manufacturer industrial component. Key specifications include key_width: 241.00 MILLIMETERS NOMINAL MM, key_height: 252.00 MILLIMETERS NOMINAL MM, key_length: 622.00 MILLIMETERS NOMINAL MM, special_features: P/N M-405 (ON SOURCE CONTROL DRWG) HAS BEEN REPLACED BY P/N M-4505, end_item_identification: 6920-01-185-9279, part_name_assigned_by_controlling_agency: PUMP/MOTOR/RESERVOIR/VALVE UNIT. This part is cataloged in the U.S.

Government catalog under NSN 4320-01-211-8399, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

9375599

NSN: 4320-01-211-8399
FSC: 4320 — Power and Hand Pumps
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)

SPECIFICATIONS

key_width	241.00 MILLIMETERS NOMINAL MM
key_height	252.00 MILLIMETERS NOMINAL MM
key_length	622.00 MILLIMETERS NOMINAL MM
special_features	P/N M-405 (ON SOURCE CONTROL DRWG) HAS BEEN REPLACED BY P/N M-4505
functional_description	4-WAY/3-POSITION SOLENOID OPERATED DO3 VALVE,STANDARD TANDEM CENTER SHOWN, .250" NPT OUTLETS, HORIZONTAL MOUNTING STANDARD, VERTICAL MOUNTING (MOTOR-UP) OPTIONAL
end_item_identification	6920-01-185-9279
part_name_assigned_by_controlling_agency	PUMP/MOTOR/RESERVOIR/VALVE UNIT
NSN	4320-01-211-8399

COMPONENT DIAGRAM

KEY FEATURES

•

KEY WIDTH: 241.00 MILLIMETERS NOMINAL MM

•

SUPPLEMENTARY FEATURES: 115/230 VAC,60CY, SINGLE PHASE, 2000 PSI/RV,SOLENOID VALVE, SPOOL TYPE, 4 WAY TANDEM CENTER WITH STANDARD NFPA DOI INTERFACE, 12 VDC COIL, 3.5 AMP, 1800 TO 1900 PSI,OPERATIONAL FLOW RATE AT 2000PSI, 1.9GPM, MOTOR: SINGLE PHASE 2HP, 60 CYCLES, 3450 RPM, LOCK ROTOR KILOVOLT AMP AT VAC 130AMPS, AT 230 VAC 65 AMPS, TEMPERATURE RISE: 75C, MAX AMBIENT TEMPERATURE: 40C, CURRENT LOAD AT 115VAC: 20.4 AMPS, AT 230VAC: 10.2AMPS VDC

•

KEY HEIGHT: 252.00 MILLIMETERS NOMINAL MM

•

KEY LENGTH: 622.00 MILLIMETERS NOMINAL MM

•

FUNCTIONAL DESCRIPTION: 4-WAY/3-POSITION SOLENOID OPERATED DO3 VALVE,STANDARD TANDEM CENTER SHOWN, .250" NPT OUTLETS, HORIZONTAL MOUNTING STANDARD, VERTICAL MOUNTING (MOTOR-UP) OPTIONAL

TECHNICAL CHARACTERISTICS

KEY WIDTH	241.00 MILLIMETERS NOMINAL MM
SUPPLEMENTARY FEATURES	115/230 VAC,60CY, SINGLE PHASE, 2000 PSI/RV,SOLENOID VALVE, SPOOL TYPE, 4 WAY TANDEM CENTER WITH STANDARD NFPA DOI INTERFACE, 12 VDC COIL, 3.5 AMP, 1800 TO 1900 PSI,OPERATIONAL FLOW RATE AT 2000PSI, 1.9GPM, MOTOR: SINGLE PHASE 2HP, 60 CYCLES, 3450 RPM, LOCK ROTOR KILOVOLT AMP AT VAC 130AMPS, AT 230 VAC 65 AMPS, TEMPERATURE RISE: 75C, MAX AMBIENT TEMPERATURE: 40C, CURRENT LOAD AT 115VAC: 20.4 AMPS, AT 230VAC: 10.2AMPS VDC
KEY HEIGHT	252.00 MILLIMETERS NOMINAL MM
KEY LENGTH	622.00 MILLIMETERS NOMINAL MM
SPECIAL FEATURES	P/N M-405 (ON SOURCE CONTROL DRWG) HAS BEEN REPLACED BY P/N M-4505
FUNCTIONAL DESCRIPTION	4-WAY/3-POSITION SOLENOID OPERATED DO3 VALVE,STANDARD TANDEM CENTER SHOWN, .250" NPT OUTLETS, HORIZONTAL MOUNTING STANDARD, VERTICAL MOUNTING (MOTOR-UP) OPTIONAL
PART NAME ASSIGNED BY CONTROLLING AGENCY	PUMP/MOTOR/RESERVOIR/VALVE UNIT
END ITEM IDENTIFICATION	6920-01-185-9279

SUBSTITUTES & CROSS-REFERENCES 2

1949-500-050Reference document

Same NSN cross-reference

Reference document — Secondary reference

M-405Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 9375599?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 9375599?

9375599 is a MOTOR,HYDRAULIC.

What parts can replace 9375599?

There are 2 known substitutes for 9375599: 1949-500-050, M-405. Substitute compatibility should be verified for your specific system.

What is the NSN for 9375599?

9375599 is cataloged in the U.S. Government catalog under NSN 4320-01-211-8399. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

9375599 — MOTOR,HYDRAULIC

Request a Quote — 9375599