PartsTable
Technical Data Sheet
Download PDF

93750 — LEVER,MANUAL CONTROL

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

93750: LEVER,MANUAL CONTROL.

The LEVER,MANUAL CONTROL is a the manufacturer industrial component. Key specifications include carrying_case: PROVIDED, measurement_unit: FEET PER MINUTE, fsc_application_data: GENERAL PURPOSE USE, instrument_calibration_range: 0 TO 1250 OR 0 TO 2500, smallest_increment_indicated: 0.0, accessory_components_and_quantity: LO-FLOW PROBE,1; PITOT PROBE,1; DIFFUSER PROBE,1; STATIC PRESSURE PROBE,1; RUBBER TUBE,2. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-9792, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
93750
NSN: 3110-00-100-9792
NIINs: 001009792, 004100575, 013031208
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
carrying_casePROVIDED
measurement_unitFEET PER MINUTE
fsc_application_dataGENERAL PURPOSE USE
instrument_calibration_range0 TO 1250 OR 0 TO 2500
smallest_increment_indicated0.0
accessory_components_and_quantityLO-FLOW PROBE,1; PITOT PROBE,1; DIFFUSER PROBE,1; STATIC PRESSURE PROBE,1; RUBBER TUBE,2
NSN3110-00-100-9792
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 93750 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1700 INCHES NOMINAL IN
•
CONE WIDTH: 2.5000 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 7.5000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1700 INCHES NOMINAL IN
CONE WIDTH2.5000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER7.5000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
456512Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 93750?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 93750?
93750 is a LEVER,MANUAL CONTROL.
What parts can replace 93750?
There is 1 known substitute for 93750: 456512. Substitute compatibility should be verified for your specific system.
What is the NSN for 93750?
93750 is cataloged in the U.S. Government catalog under NSN 3110-00-100-9792. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 93750

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.