PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 936C2C
936C2C ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410 OVERALL, hole_diameter: 0.093 INCHES NOMINAL IN, outside_diameter: 0.170 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN, special_features: NO. 2 NOM BOLT SIZE, style_designator: COUNTERSINK EXTERNAL TEETH, countersink_angle: 82.0 DEGREES NOMINAL.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-184-9809, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
936C2C
NSN: 5310-00-184-9809
FSC: 5310
CAGE: 53397 — NUMAX ELECTRONICS INC (USA)
SPECIFICATIONS
materialSTEEL COMP 410 OVERALL
hole_diameter0.093 INCHES NOMINAL IN
outside_diameter0.170 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
special_featuresNO. 2 NOM BOLT SIZE
style_designatorCOUNTERSINK EXTERNAL TEETH
countersink_angle82.0 DEGREES NOMINAL
material_thickness0.005 INCHES MINIMUM AND 0.009 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-184-9809
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 936C2C · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COUNTERSINK ANGLE: 82.0 DEGREES NOMINAL
•
MATERIAL THICKNESS: 0.005 INCHES MINIMUM AND 0.009 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: COUNTERSINK EXTERNAL TEETH
•
MATERIAL: STEEL COMP 410 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HOLE DIAMETER: 0.093 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.170 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
COUNTERSINK ANGLE82.0 DEGREES NOMINAL
MATERIAL THICKNESS0.005 INCHES MINIMUM AND 0.009 INCHES MAXIMUM IN
STYLE DESIGNATORCOUNTERSINK EXTERNAL TEETH
MATERIALSTEEL COMP 410 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SPECIAL FEATURESNO. 2 NOM BOLT SIZE
HOLE DIAMETER0.093 INCHES NOMINAL IN
OUTSIDE DIAMETER0.170 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
15024-100AInterchangeable
interchangeable cross-reference
interchangeable
15024-100Interchangeable
interchangeable cross-reference
interchangeable
3595-1Interchangeable
px12-350r
interchangeable
58A5A239-1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 936C2C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 936C2C?
936C2C is a WASHER,LOCK.
What parts can replace 936C2C?
There are 4 known substitutes for 936C2C: 15024-100A, 15024-100, 3595-1 and 1 more. Substitute compatibility should be verified for your specific system.
Is 936C2C still available?
936C2C is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 936C2C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026