PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 936A463-8
936A463-8 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,SADDLE is a the manufacturer industrial component. Key specifications include radius: 0.390 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN, hole_diameter: 0.112 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN, overall_width: 0.578 INCHES NOMINAL IN, overall_height: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN, overall_length: 0.500 INCHES MINIMUM AND 0.532 INCHES MAXIMUM IN, special_features: MATERIAL THICKNESS 0.020 IN. MIN 0.030 IN.

MAX IN. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-366-1622, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
936A463-8
NSN: 5310-01-366-1622
FSC: 5310
CAGE: 99167 — HAMILTON SUNDSTRAND CORPORATION (USA)
SPECIFICATIONS
radius0.390 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN
hole_diameter0.112 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN
overall_width0.578 INCHES NOMINAL IN
overall_height0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
overall_length0.500 INCHES MINIMUM AND 0.532 INCHES MAXIMUM IN
special_featuresMATERIAL THICKNESS 0.020 IN. MIN 0.030 IN. MAX IN
style_designatorSADDLE
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_document_and_classificationASTM A109 ASSN STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-366-1622
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 936A463-8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.112 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A109 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
MATERIAL: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
STYLE DESIGNATOR: SADDLE
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.112 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN
OVERALL LENGTH0.500 INCHES MINIMUM AND 0.532 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A109 ASSN STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
STYLE DESIGNATORSADDLE
OVERALL HEIGHT0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
SPECIAL FEATURESMATERIAL THICKNESS 0.020 IN. MIN 0.030 IN. MAX IN
OVERALL WIDTH0.578 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
MIL-W-45595/4Interchangeable
interchangeable cross-reference
interchangeable
M45595/4-06Interchangeable
interchangeable cross-reference
interchangeable
81349Interchangeable
interchangeable cross-reference
interchangeable
M45595/4-02Interchangeable
interchangeable cross-reference
interchangeable
936A463-9Interchangeable
interchangeable cross-reference
interchangeable
M45595/4-09Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 936A463-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 936A463-8?
936A463-8 is a WASHER,SADDLE.
What parts can replace 936A463-8?
There are 9 known substitutes for 936A463-8: MIL-W-45595/4, M45595/4-06, 81349 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 936A463-8?
936A463-8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-366-1622. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 936A463-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026