PartsTable
Technical Data Sheet
Download PDF

93620A182 — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

93620A182: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 0.375 INCHES NOMINAL IN, material: STEEL COMP 12L14 OVERALL, thread_class: 2A RIGHT EXTERNAL A, thread_length: 0.28125 INCHES NOMINAL LEFT INTERNAL (INCLUDES THRU THREAD) IN, flange_thickness: 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN, special_features: TENSILE STRENGTH IS 55,000 PSI;HARDNESS RATED AT ROCKWELL B40;REACH AND ROHS 3 COMPLIANT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-695-5579, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
93620A182
NSN: 5340-01-695-5579
FSC: 5340 — Hardware, Commercial
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
length0.375 INCHES NOMINAL IN
materialSTEEL COMP 12L14 OVERALL
thread_class2A RIGHT EXTERNAL A
thread_length0.28125 INCHES NOMINAL LEFT INTERNAL (INCLUDES THRU THREAD) IN
flange_thickness0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
special_featuresTENSILE STRENGTH IS 55,000 PSI;HARDNESS RATED AT ROCKWELL B40;REACH AND ROHS 3 COMPLIANT
style_designatorFLANGED
thread_directionRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
width_across_flats0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
nominal_thread_size0.1900 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
cross-sectional_shapeHEXAGON
end_item_identification7025-01-658-4990
NSN5340-01-695-5579
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 93620A182 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH ACROSS FLATS: 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
•
LENGTH: 0.375 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.375 INCHES NOMINAL RIGHT EXTERNAL IN
•
STYLE DESIGNATOR: FLANGED
•
THREAD DIRECTION: RIGHT-HAND RIGHT EXTERNAL
TECHNICAL CHARACTERISTICS
FLANGE WIDTH ACROSS FLATS0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
LENGTH0.375 INCHES NOMINAL IN
FLANGE THICKNESS0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
THREAD LENGTH0.375 INCHES NOMINAL RIGHT EXTERNAL IN
THREAD LENGTH0.28125 INCHES NOMINAL LEFT INTERNAL (INCLUDES THRU THREAD) IN
STYLE DESIGNATORFLANGED
THREAD DIRECTIONRIGHT-HAND RIGHT EXTERNAL
THREAD DIRECTIONRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
NOMINAL THREAD SIZE0.1900 INCHES RIGHT EXTERNAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 93620A182?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 93620A182?
93620A182 is a STANDOFF,THREADED,SPACING.
What is the NSN for 93620A182?
93620A182 is cataloged in the U.S. Government catalog under NSN 5340-01-695-5579. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 93620A182

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.