PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 935C8
935C8 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include color: YELLOW OVERALL, material: STEEL COMP 1060 OR STEEL COMP 1080 OVERALL, hole_diameter: 0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN, hardness_rating: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM, outside_diameter: 0.296 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-261-7410, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
935C8
NSN: 5310-00-261-7410
FSC: 5310
CAGE: 53397 — NUMAX ELECTRONICS INC (USA)
SPECIFICATIONS
colorYELLOW OVERALL
materialSTEEL COMP 1060 OR STEEL COMP 1080 OVERALL
hole_diameter0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
outside_diameter0.296 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.040 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
supplementary_featuresDEEP YELLOW COLOR FED STD 595 COLOR NO. 23538; SUBSTITUTIVE NSN 5310-00-045-3299
nondefinitive_spec/std_dataA CLASS AND 2 STYLE
specification/standard_data81348-FF-W-84 GOVERNMENT SPECIFICATION AND 96906-MS35337/CANCELED/ GOVERNMENT STANDARD
departure_from_cited_documentFF-W-84,PARAGRAPH 3.3.1 CADMIUM PLATING
NSN5310-00-261-7410
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 935C8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
NONDEFINITIVE SPEC/STD DATA: A CLASS AND 2 STYLE
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66,UNS G10600 THRU UNS G10800 FED STD ALL MATERIAL RESPONSES OVERALL
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1080 OVERALL
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
OUTSIDE DIAMETER: 0.296 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
NONDEFINITIVE SPEC/STD DATAA CLASS AND 2 STYLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66,UNS G10600 THRU UNS G10800 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP 1060 OR STEEL COMP 1080 OVERALL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
OUTSIDE DIAMETER0.296 INCHES MAXIMUM IN
MATERIAL THICKNESS0.040 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA81348-FF-W-84 GOVERNMENT SPECIFICATION AND 96906-MS35337/CANCELED/ GOVERNMENT STANDARD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
A15017Interchangeable
interchangeable cross-reference
interchangeable
10-1824 PIECE 66Interchangeable
interchangeable cross-reference
interchangeable
10-1824Interchangeable
interchangeable cross-reference
interchangeable
K410A15017Interchangeable
interchangeable cross-reference
interchangeable
FF-W-84Interchangeable
Same NIIN cross-reference
interchangeable
MS35337-42Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 935C8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 935C8?
935C8 is a WASHER,LOCK.
What parts can replace 935C8?
There are 8 known substitutes for 935C8: A15017, 10-1824 PIECE 66, 10-1824 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 935C8?
935C8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-261-7410. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 935C8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026