PartsTable
Technical Data Sheet
Download PDF

935605 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

935605: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, special_features: MATERIAL IN COMPLIANCE WITH SCD-5,FSCM 90166, surface_treatment: OXIDE OVERALL, peripheral_diameter: 1.485 INCHES NOMINAL IN, center_hole_diameter: 1.128 INCHES MINIMUM AND 1.132 INCHES MAXIMUM IN, cross-sectional_height: 0.360 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-497-7399, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
935605
NSN: 5330-00-497-7399
FSC: 5330 — Packing and Gasket Materials
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
special_featuresMATERIAL IN COMPLIANCE WITH SCD-5,FSCM 90166
surface_treatmentOXIDE OVERALL
peripheral_diameter1.485 INCHES NOMINAL IN
center_hole_diameter1.128 INCHES MINIMUM AND 1.132 INCHES MAXIMUM IN
cross-sectional_height0.360 INCHES NOMINAL IN
cross-sectional_thickness0.177 INCHES MINIMUM AND 0.179 INCHES MAXIMUM IN
cross-sectional_shape_styleCUP
material_document_and_classificationQQ-T-590,CL -2 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-497-7399
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 935605 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.177 INCHES MINIMUM AND 0.179 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.360 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-T-590,CL -2 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: CUP
•
PERIPHERAL DIAMETER: 1.485 INCHES NOMINAL IN
•
SURFACE TREATMENT: OXIDE OVERALL
•
CENTER HOLE DIAMETER: 1.128 INCHES MINIMUM AND 1.132 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.177 INCHES MINIMUM AND 0.179 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.360 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-T-590,CL -2 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLECUP
PERIPHERAL DIAMETER1.485 INCHES NOMINAL IN
SPECIAL FEATURESMATERIAL IN COMPLIANCE WITH SCD-5,FSCM 90166
SURFACE TREATMENTOXIDE OVERALL
CENTER HOLE DIAMETER1.128 INCHES MINIMUM AND 1.132 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
6414-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 935605?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 935605?
935605 is a RETAINER,PACKING.
What parts can replace 935605?
There is 1 known substitute for 935605: 6414-6. Substitute compatibility should be verified for your specific system.
What is the NSN for 935605?
935605 is cataloged in the U.S. Government catalog under NSN 5330-00-497-7399. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 935605

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.