PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 935604
935604 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, rim_surface_width: 0.028 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN, peripheral_diameter: 1.345 INCHES NOMINAL IN, center_hole_diameter: 1.040 INCHES MINIMUM AND 1.044 INCHES MAXIMUM IN, cross-sectional_height: 0.210 INCHES NOMINAL IN, flanged_body_outside_diameter: 1.100 INCHES MINIMUM AND 1.104 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-299-0376, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
935604
NSN: 5330-00-299-0376
FSC: 5330
CAGE: 90166 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
rim_surface_width0.028 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN
peripheral_diameter1.345 INCHES NOMINAL IN
center_hole_diameter1.040 INCHES MINIMUM AND 1.044 INCHES MAXIMUM IN
cross-sectional_height0.210 INCHES NOMINAL IN
flanged_body_outside_diameter1.100 INCHES MINIMUM AND 1.104 INCHES MAXIMUM IN
NSN5330-00-299-0376
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 935604 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
CENTER HOLE DIAMETER: 1.040 INCHES MINIMUM AND 1.044 INCHES MAXIMUM IN
•
FLANGED BODY OUTSIDE DIAMETER: 1.100 INCHES MINIMUM AND 1.104 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 1.345 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.210 INCHES NOMINAL IN
•
RIM SURFACE WIDTH: 0.028 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
CENTER HOLE DIAMETER1.040 INCHES MINIMUM AND 1.044 INCHES MAXIMUM IN
FLANGED BODY OUTSIDE DIAMETER1.100 INCHES MINIMUM AND 1.104 INCHES MAXIMUM IN
PERIPHERAL DIAMETER1.345 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.210 INCHES NOMINAL IN
RIM SURFACE WIDTH0.028 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
1606Interchangeable
interchangeable cross-reference
interchangeable
28055-6Interchangeable
interchangeable cross-reference
interchangeable
EA2386Interchangeable
interchangeable cross-reference
interchangeable
SY1060182Interchangeable
interchangeable cross-reference
interchangeable
6000690Interchangeable
interchangeable cross-reference
interchangeable
60006Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 935604?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 935604?
935604 is a PACKING,PREFORMED.
What parts can replace 935604?
There are 11 known substitutes for 935604: 1606, 28055-6, EA2386 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 935604?
935604 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-299-0376. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 935604

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026