PartsTable
Technical Data Sheet
Download PDF

9354516628 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

9354516628: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.103 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, thread_length: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, screw_material: STEEL COMP 1010. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-243-4768, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9354516628
NSN: 5305-00-243-4768
FSC: 5305 — Screws
CAGE: S4080 — PILATUS AIRCRAFT LTD (CHE)
SPECIFICATIONS
head_styleROUND
head_height0.103 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
thread_length0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
screw_materialSTEEL COMP 1010
fastener_length0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.138 INCHES IN
screw_surface_treatmentCADMIUM
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-243-4768
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 9354516628 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.103 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-671 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: ROUND
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.103 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-671 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEROUND
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 1010
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
SUBSTITUTES & CROSS-REFERENCES 1
AN515-6-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 9354516628?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9354516628?
9354516628 is a SCREW,MACHINE.
What parts can replace 9354516628?
There is 1 known substitute for 9354516628: AN515-6-4. Substitute compatibility should be verified for your specific system.
What is the NSN for 9354516628?
9354516628 is cataloged in the U.S. Government catalog under NSN 5305-00-243-4768. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9354516628

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.