PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 934B055610
934B055610 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLATE,MENDING is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, slot_width: 0.156 INCHES NOMINAL IN, slot_length: 0.440 INCHES NOMINAL IN, overall_width: 0.438 INCHES NOMINAL IN, overall_length: 1.875 INCHES NOMINAL IN, special_features: SLOTS ARE POSITIONED LENGTHWISE AT BOTH ENDS OF PLATE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-218-1037, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
934B055610
NSN: 5340-01-218-1037
FSC: 5340
CAGE: 34228 — L3 TECHNOLOGIES, INC. DIV L3 KEO (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061
slot_width0.156 INCHES NOMINAL IN
slot_length0.440 INCHES NOMINAL IN
overall_width0.438 INCHES NOMINAL IN
overall_length1.875 INCHES NOMINAL IN
special_featuresSLOTS ARE POSITIONED LENGTHWISE AT BOTH ENDS OF PLATE
style_designatorRECTANGULAR
surface_treatmentANODIZE
material_thickness0.031 INCHES NOMINAL IN
material_document_and_classificationQQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE
surface_treatment_document_and_classificationMIL-A-8625,TY 2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE
NSN5340-01-218-1037
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 934B055610 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SLOT WIDTH: 0.156 INCHES NOMINAL IN
•
SLOT LENGTH: 0.440 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL: ALUMINUM ALLOY 6061
TECHNICAL CHARACTERISTICS (FLIS)
SLOT WIDTH0.156 INCHES NOMINAL IN
SLOT LENGTH0.440 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE
SPECIAL FEATURESSLOTS ARE POSITIONED LENGTHWISE AT BOTH ENDS OF PLATE
OVERALL WIDTH0.438 INCHES NOMINAL IN
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
MATERIALALUMINUM ALLOY 6061
OVERALL LENGTH1.875 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
124713Interchangeable
interchangeable cross-reference
interchangeable
55610Interchangeable
interchangeable cross-reference
interchangeable
4 1-2LDP1-4BM200Interchangeable
interchangeable cross-reference
interchangeable
45-1000-02L200Interchangeable
interchangeable cross-reference
interchangeable
J9054Interchangeable
interchangeable cross-reference
interchangeable
55694Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 934B055610?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 934B055610?
934B055610 is a PLATE,MENDING.
What parts can replace 934B055610?
There are 7 known substitutes for 934B055610: 124713, 55610, 4 1-2LDP1-4BM200 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 934B055610?
934B055610 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-218-1037. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 934B055610

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026