PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 934B055274
934B055274 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLATE,MENDING is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY, overall_width: 0.500 INCHES NOMINAL IN, overall_length: 2.000 INCHES NOMINAL IN, style_designator: RECTANGULAR, material_thickness: 0.125 INCHES NOMINAL IN, mounting_hole_type: PLAIN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-101-6118, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
934B055274
NSN: 5340-01-101-6118
FSC: 5340
CAGE: 34228 — L3 TECHNOLOGIES, INC. DIV L3 KEO (USA)
SPECIFICATIONS
materialCOPPER ALLOY
overall_width0.500 INCHES NOMINAL IN
overall_length2.000 INCHES NOMINAL IN
style_designatorRECTANGULAR
material_thickness0.125 INCHES NOMINAL IN
mounting_hole_typePLAIN
mounting_hole_diameter0.188 INCHES NOMINAL IN
NSN5340-01-101-6118
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 934B055274 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE TYPE: PLAIN
•
MATERIAL: COPPER ALLOY
•
MATERIAL THICKNESS: 0.125 INCHES NOMINAL IN
•
MOUNTING HOLE DIAMETER: 0.188 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING HOLE TYPEPLAIN
MATERIALCOPPER ALLOY
MATERIAL THICKNESS0.125 INCHES NOMINAL IN
OVERALL LENGTH2.000 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.188 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
057410Interchangeable
interchangeable cross-reference
interchangeable
7588298Interchangeable
interchangeable cross-reference
interchangeable
55274Interchangeable
interchangeable cross-reference
interchangeable
42262Interchangeable
interchangeable cross-reference
interchangeable
94252Interchangeable
interchangeable cross-reference
interchangeable
B94.19 TABLE 37Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 934B055274?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 934B055274?
934B055274 is a PLATE,MENDING.
What parts can replace 934B055274?
There are 7 known substitutes for 934B055274: 057410, 7588298, 55274 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 934B055274?
934B055274 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-101-6118. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 934B055274

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026