PartsTable
Technical Data Sheet
Download PDF

93475A280 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

93475A280: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, thickness: 2.0 MILLIMETERS NOMINAL MM, hole_diameter: 10.5 MILLIMETERS NOMINAL MM, overall_diameter: 20.0 MILLIMETERS NOMINAL MM, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-432-1744, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
93475A280
NSN: 5310-01-432-1744
FSC: 5310 — Nuts and Washers
CAGE: 4M087 — VOLKSWAGEN OF AMERICA INDUSTRIAL ENGINE DIV (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
thickness2.0 MILLIMETERS NOMINAL MM
hole_diameter10.5 MILLIMETERS NOMINAL MM
overall_diameter20.0 MILLIMETERS NOMINAL MM
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identificationMRAP - COUGAR CAT1 A2
cross-sectional_shape_styleRECTANGULAR
NSN5310-01-432-1744
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 93475A280 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 20.0 MILLIMETERS NOMINAL MM
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 10.5 MILLIMETERS NOMINAL MM
•
THICKNESS: 2.0 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER20.0 MILLIMETERS NOMINAL MM
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
END ITEM IDENTIFICATIONMRAP - COUGAR CAT1 A2
MATERIALSTEEL CORROSION RESISTING OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER10.5 MILLIMETERS NOMINAL MM
THICKNESS2.0 MILLIMETERS NOMINAL MM
SUBSTITUTES & CROSS-REFERENCES 2
ASE06014Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
DIN125-M10Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 93475A280?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 93475A280?
93475A280 is a WASHER,FLAT.
What parts can replace 93475A280?
There are 2 known substitutes for 93475A280: ASE06014, DIN125-M10. Substitute compatibility should be verified for your specific system.
What is the NSN for 93475A280?
93475A280 is cataloged in the U.S. Government catalog under NSN 5310-01-432-1744. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 93475A280

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.