PartsTable
Technical Data Sheet
Download PDF

93344-3 — BEARING,PLAIN,SELF-ALIGNING

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

93344-3: BEARING,PLAIN,SELF-ALIGNING.

The BEARING,PLAIN,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 416 OVERALL, body_style: PLAIN, SOLID, tooth_form: STANDARD, pitch_diameter: 1.7490 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN, pressure_angle: 20.0000 DEGREES, teeth_quantity: 112. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-412-0496, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
93344-3
NSN: 3120-00-412-0496
NIINs: 004120496, 009143734
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 82106 — PARKER-HANNIFIN CORPORATION DBA CONTROL SYSTEMS DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 416 OVERALL
body_stylePLAIN, SOLID
tooth_formSTANDARD
pitch_diameter1.7490 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
pressure_angle20.0000 DEGREES
teeth_quantity112
style_designatorPROTRUDING HUB
attachment_methodCLAMP
face_nominal_width0.092 INCHES IN
hub_nominal_diameter0.250 INCHES FIRST END IN
bore_nominal_diameter0.187 INCHES BOTH ENDS IN
nominal_overall_length0.380 INCHES IN
NSN3120-00-412-0496
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 93344-3 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INNER MEMBER WIDTH: 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
•
HARDNESS RATING: 55.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM INNER MEMBER
•
OUTER MEMBER WIDTH: 0.5820 INCHES MINIMUM AND 0.5920 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: WITHOUT INSERT OR LINER WITH STAKING GROOVE
•
LUBRICATION FEATURE: PERFORATION OUTER RACE MEMBER
TECHNICAL CHARACTERISTICS
INNER MEMBER WIDTH0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
HARDNESS RATING55.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM INNER MEMBER
HARDNESS RATING28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM OUTER RACE MEMBER
OUTER MEMBER WIDTH0.5820 INCHES MINIMUM AND 0.5920 INCHES MAXIMUM IN
STYLE DESIGNATORWITHOUT INSERT OR LINER WITH STAKING GROOVE
LUBRICATION FEATUREPERFORATION OUTER RACE MEMBER
LUBRICATION FEATUREPERFORATION INNER MEMBER
SPECIAL FEATURESBERYLLIUM COPPER FLANGED BUSHING INSTALLED IN BALL ID.; 37 MIN R/C
SURFACE TREATMENTLUBRICANT DRY FILM OUTER RACE MEMBER
BORE DIAMETER0.6247 INCHES MINIMUM AND 0.6252 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
KMB10-15Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 93344-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 93344-3?
93344-3 is a BEARING,PLAIN,SELF-ALIGNING.
What parts can replace 93344-3?
There is 1 known substitute for 93344-3: KMB10-15. Substitute compatibility should be verified for your specific system.
What is the NSN for 93344-3?
93344-3 is cataloged in the U.S. Government catalog under NSN 3120-00-412-0496. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 93344-3