PartsTable
Technical Data Sheet
PartsTable / O-RING / 9333764
9333764 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CARTRIDGE,20 MILLIMETER is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OR STEEL CARTRIDGE CASE, fuze_type: POINT DETONATING LOCATION NOT OTHERWISE SPECIFIED, gross_weight: 93.0 SHIPPING CONTAINER POUNDS AND 2223.0 PALLET POUNDS, cubic_measure: 1.3050 CUBIC FEET, tracer_element: INCLUDED, unable_to_decode: UNABLE TO DECODE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-933-3764, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9333764
NSN: 5331-00-933-3764
FSC: 5331 — O-RING
CAGE: 20149 — INTRUPA MFG CO (USA)
SPECIFICATIONS
materialCOPPER ALLOY OR STEEL CARTRIDGE CASE
fuze_typePOINT DETONATING LOCATION NOT OTHERWISE SPECIFIED
gross_weight93.0 SHIPPING CONTAINER POUNDS AND 2223.0 PALLET POUNDS
cubic_measure1.3050 CUBIC FEET
tracer_elementINCLUDED
unable_to_decodeUNABLE TO DECODE
fuze_model_numberM505A3 LOCATION NOT OTHERWISE SPECIFIED
link_model_numberM14A2
cartridge_quantity100
dod_ammunition_code1305-A792
link_feed_directionRIGHT-HAND
net_explosive_weight0.1100000 STORAGE POUNDS AND 0.1100000 TRANSPORTATION POUNDS
NSN5331-00-933-3764
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9333764 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.625 INCHES NOMINAL IN
•
MATERIAL: PLASTIC
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.625 INCHES NOMINAL IN
MATERIALPLASTIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
9333764Interchangeable
Cartridge,20 Millimeter
interchangeable
1305-A792Interchangeable
Cartridge,20 Millimeter
interchangeable
9342669Interchangeable
Cartridge,20 Millimeter
interchangeable
9342670Interchangeable
Cartridge,20 Millimeter
interchangeable
1623077Interchangeable
Same NIIN cross-reference
interchangeable
007394997Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9333764?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9333764?
9333764 is a CARTRIDGE,20 MILLIMETER.
What parts can replace 9333764?
There are 7 known substitutes for 9333764: 9333764, 1305-A792, 9342669 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9333764?
9333764 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-933-3764. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9333764

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026