The Plastic Round Section, cataloged under National Stock Number 9330-01-378-8140, is classified within Federal Supply Class 9330 (Plastics Fabricated Materials) of the Nonmetallic Fabricated Materials group. Government technical data includes 7 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 9330-01-378-8140 |
| Item Name | Plastic Round Section |
| FSC / FSG | 9330 / 93 — Plastics Fabricated Materials |
| Status | ACTIVE |
| Length | 1.380 INCHES NOMINAL1.380 INCHES NOMINAL IN |
| Surface Condition | SMOOTH INSIDE AND OUTSIDE PERIPHERY |
| Cross-Sectional Shape Style | CIRCULAR W/ CENTER APERTURECIRCULAR W/ CENTER APERTURE |
| Cross Section Inside Diameter | 0.330 INCHES MINIMUM AND 0.330 INCHES MINIMUM AND 0.340 INCHES MAXIMUM0.340 INCHES MAXIMUM IN |
| Color | WHITE BOTH SIDES |
| Cross Section Outside Diameter | 0.875 INCHES NOMINAL0.875 INCHES NOMINAL IN |
| Material | PLASTIC LOCATION NOT OTHERWISE SPECIFIED |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 12903 | 3/9 Design control — primary reference Gaither Tool Co. |
NSN 9330-01-378-8140 is a Plastic Round Section, classified under FSC 9330, Plastics Fabricated Materials. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 8465-01-700-5289. Verify interchangeability with system specifications before substitution.
Key specifications for 9330-01-378-8140: Length: 1.380 INCHES NOMINAL1.380 INCHES NOMINAL IN; Surface Condition: SMOOTH INSIDE AND OUTSIDE PERIPHERY; Cross-Sectional Shape Style: CIRCULAR W/ CENTER APERTURECIRCULAR W/ CENTER APERTURE; Cross Section Inside Diameter: 0.330 INCHES MINIMUM AND 0.330 INCHES MINIMUM AND 0.340 INCHES MAXIMUM0.340 INCHES MAXIMUM IN. 7 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.