PartsTable
Technical Data Sheet
Download PDF

9320009-3 — PLUNGER,DETENT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9320009-3: PLUNGER,DETENT.

The PLUNGER,DETENT is a the manufacturer industrial component. Key specifications include length: 0.900 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, material: NICKEL ALLOY 400 OVERALL, special_features: OD1.000 IN.; MATERIAL COLD DRAWN AND STRESS RELIEVED;NHA FSC 1660, CAGE 31441, P/N 9320014, NAME REGULATOR (BOS) IN, material_document_and_classification: QQ-N-281, CLASS A FED SPEC SINGLE MATERIAL RESPONSE, part_name_assigned_by_controlling_agency: PLUNGER-REDUCER. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-438-6192, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9320009-3
NSN: 5340-01-438-6192
FSC: 5340 — Hardware, Commercial
CAGE: 62323 — CONAX FLORIDA CORPORATION (USA)
SPECIFICATIONS
length0.900 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
materialNICKEL ALLOY 400 OVERALL
special_featuresOD1.000 IN.; MATERIAL COLD DRAWN AND STRESS RELIEVED;NHA FSC 1660, CAGE 31441, P/N 9320014, NAME REGULATOR (BOS) IN
material_document_and_classificationQQ-N-281, CLASS A FED SPEC SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agencyPLUNGER-REDUCER
NSN5340-01-438-6192
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9320009-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.900 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281, CLASS A FED SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: NICKEL ALLOY 400 OVERALL
TECHNICAL CHARACTERISTICS
LENGTH0.900 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-281, CLASS A FED SPEC SINGLE MATERIAL RESPONSE
SPECIAL FEATURESOD1.000 IN.; MATERIAL COLD DRAWN AND STRESS RELIEVED;NHA FSC 1660, CAGE 31441, P/N 9320014, NAME REGULATOR (BOS) IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPLUNGER-REDUCER
MATERIALNICKEL ALLOY 400 OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 9320009-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9320009-3?
9320009-3 is a PLUNGER,DETENT.
What is the NSN for 9320009-3?
9320009-3 is cataloged in the U.S. Government catalog under NSN 5340-01-438-6192. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9320009-3