PartsTable
Technical Data Sheet
Download PDF

931996-101 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

931996-101: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, fork_depth: 0.950 INCHES NOMINAL IN, shank_length: 1.300 INCHES NOMINAL IN, hole_diameter: 0.2500 INCHES MINIMUM AND 0.2508 INCHES MAXIMUM IN, overall_width: 0.930 INCHES NOMINAL IN, overall_height: 1.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-238-6166, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
931996-101
NSN: 5340-01-238-6166
FSC: 5340 — Hardware, Commercial
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
fork_depth0.950 INCHES NOMINAL IN
shank_length1.300 INCHES NOMINAL IN
hole_diameter0.2500 INCHES MINIMUM AND 0.2508 INCHES MAXIMUM IN
overall_width0.930 INCHES NOMINAL IN
overall_height1.000 INCHES NOMINAL IN
fork_span_width0.687 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN
fork_arm_thickness0.120 INCHES NOMINAL IN
width_across_flats0.500 INCHES NOMINAL IN
material_document_and_classificationQQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_center_of_securing_pin_hole_to_rod_end2.500 INCHES NOMINAL IN
distance_from_pivot_pinhole_center_to_rod_connection_end2.500 INCHES NOMINAL IN
NSN5340-01-238-6166
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 931996-101 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.500 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.687 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.120 INCHES NOMINAL IN
•
SHANK LENGTH: 1.300 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: ALUMINUM ALLOY 2024 OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.000 INCHES NOMINAL IN
WIDTH ACROSS FLATS0.500 INCHES NOMINAL IN
FORK SPAN WIDTH0.687 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN
FORK ARM THICKNESS0.120 INCHES NOMINAL IN
SHANK LENGTH1.300 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.930 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024 OVERALL
DISTANCE FROM CENTER OF SECURING PIN HOLE TO ROD END2.500 INCHES NOMINAL IN
FORK DEPTH0.950 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 931996-101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 931996-101?
931996-101 is a CLEVIS,ROD END.
What is the NSN for 931996-101?
931996-101 is cataloged in the U.S. Government catalog under NSN 5340-01-238-6166. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 931996-101

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.