PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 93125
93125 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, body_width: 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, seal_width: 0.500 INCHES MAXIMUM IN, body_height: 0.185 INCHES MAXIMUM IN, body_length: 0.840 INCHES MAXIMUM IN, construction: SOLID. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0622, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
93125
NSN: 3110-00-100-0622
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
body_width0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
seal_width0.500 INCHES MAXIMUM IN
body_height0.185 INCHES MAXIMUM IN
body_length0.840 INCHES MAXIMUM IN
constructionSOLID
groove_width0.062 INCHES NOMINAL IN
grommet_styleROUND
hole_diameter0.125 INCHES NOMINAL IN
overall_width1.8125 INCHES NOMINAL IN
overall_height0.219 INCHES NOMINAL IN
memory_capacityUNKNOWN
NSN3110-00-100-0622
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 93125 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 12.5000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
STYLE DESIGNATOR: NORMAL ANGLE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH1.8125 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
OUTSIDE DIAMETER12.5000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
93125Interchangeable
interchangeable cross-reference
interchangeable
8839815-1Interchangeable
interchangeable cross-reference
interchangeable
AN931-2-5Interchangeable
interchangeable cross-reference
interchangeable
WM11P4XInterchangeable
interchangeable cross-reference
interchangeable
4565-13Interchangeable
interchangeable cross-reference
interchangeable
D2201PC25Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 93125?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 93125?
93125 is a MICROCIRCUIT,DIGITAL.
What parts can replace 93125?
There are 15 known substitutes for 93125: 93125, 8839815-1, AN931-2-5 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 93125?
93125 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0622. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 93125

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026