PartsTable
Technical Data Sheet
Download PDF

9311694 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9311694: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.126 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.000 INCHES NOMINAL IN, overall_length: 2.840 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 1.290 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-078-4507, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9311694
NSN: 5330-01-078-4507
FSC: 5330 — Packing and Gasket Materials
CAGE: 19203 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV US ARMY RESEARCH, DEVELOPMENT AND ENGINEERING COMMAND ARMAMENT (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter0.126 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.000 INCHES NOMINAL IN
overall_length2.840 INCHES NOMINAL IN
special_featuresCENTER OF APERTURE 1 LOCATED 1.460 IN FROM TOP AND 1.000 FROM LEFT;CENTER OF APERTURE 2 LOCATED 0.570 LEFT OFVERTICAL CENTER LINE OF APERTURE 1 AND1.100 ABOVE HORIZONAL LINE OF APERTURE2 IN
style_designatorNON-CIRCULAR
aperture_diameter1.290 INCHES NOMINAL IN
bolt_hole_quantity4
material_document_and_classificationMIL-G-1149,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
outside_edge_to_bolt_hole_center_distance_along_width0.685 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.225 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width1.550 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-078-4507
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9311694 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-1149,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
APERTURE DIAMETER: 1.290 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.550 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-1149,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH2.840 INCHES NOMINAL IN
OVERALL WIDTH2.000 INCHES NOMINAL IN
APERTURE DIAMETER1.290 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.550 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SPECIAL FEATURESCENTER OF APERTURE 1 LOCATED 1.460 IN FROM TOP AND 1.000 FROM LEFT;CENTER OF APERTURE 2 LOCATED 0.570 LEFT OFVERTICAL CENTER LINE OF APERTURE 1 AND1.100 ABOVE HORIZONAL LINE OF APERTURE2 IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.550 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.225 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9311694?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9311694?
9311694 is a GASKET.
What is the NSN for 9311694?
9311694 is cataloged in the U.S. Government catalog under NSN 5330-01-078-4507. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9311694

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.