PartsTable
Technical Data Sheet
Download PDF

93016H4109 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

93016H4109: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1020, first_leg_style: EXTENDED FLAT, first_leg_width: 1.940 INCHES MINIMUM AND 2.060 INCHES MAXIMUM IN, second_leg_width: 1.940 INCHES MINIMUM AND 2.060 INCHES MAXIMUM IN, end_item_identification: USED ON CHECK VALVE ASSEMBLY 93016H4100; END ITEM IS FUEL PUMP, 600 GPM (FU604G) 4930-01-392-7579, first_leg_hole_diameter: 0.750 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-508-8164, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
93016H4109
NSN: 5340-01-508-8164
FSC: 5340 — Hardware, Commercial
CAGE: 25567 — THE GORMAN-RUPP COMPANY DIV GORMAN-RUPP (USA)
SPECIFICATIONS
materialSTEEL COMP 1020
first_leg_styleEXTENDED FLAT
first_leg_width1.940 INCHES MINIMUM AND 2.060 INCHES MAXIMUM IN
second_leg_width1.940 INCHES MINIMUM AND 2.060 INCHES MAXIMUM IN
end_item_identificationUSED ON CHECK VALVE ASSEMBLY 93016H4100; END ITEM IS FUEL PUMP, 600 GPM (FU604G) 4930-01-392-7579
first_leg_hole_diameter0.750 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
first_leg_hole_arrangement_styleONE HOLE
material_document_and_classificationAISI-1020 ASSN STD SINGLE MATERIAL RESPONSE
second_leg_relationship_to_first_legNOT IDENTICAL
part_name_assigned_by_controlling_agencyWEIGHT ARM
first_leg_distance_from_edge_to_hole_center_along_width0.940 INCHES MINIMUM AND 1.060 INCHES MAXIMUM IN
NSN5340-01-508-8164
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 93016H4109 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG HOLE DIAMETER: 0.750 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG WIDTH: 1.940 INCHES MINIMUM AND 2.060 INCHES MAXIMUM IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: ONE HOLE
•
SUPPLEMENTARY FEATURES: SECOND END IS AT A 23 DEGREE ANGLE, 1.12 INCHES LONG, & HAS A TUBE ATTACHED BY WELDING; THE TUBE HAS A 0.125 TO 0.130 INTERNAL KEYWAY ALONG THE LENGTH AND TWO HOLES, 1 INCH APART, 0.203 DIAMETER THRU 1 SIDE, 0.250-20 UNC; TUBE OUTER DIAMETER IS 1.00; INNER DIAMETER IS 0.628 TO 0.630, AND 0.685 TO 0.695 AT KEYWAY; BOTH LEGS ARE 0.250 INCHES THICK IN
•
FIRST LEG STYLE: EXTENDED FLAT
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI-1020 ASSN STD SINGLE MATERIAL RESPONSE
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.940 INCHES MINIMUM AND 1.060 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FIRST LEG HOLE DIAMETER0.750 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG WIDTH1.940 INCHES MINIMUM AND 2.060 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SUPPLEMENTARY FEATURESSECOND END IS AT A 23 DEGREE ANGLE, 1.12 INCHES LONG, & HAS A TUBE ATTACHED BY WELDING; THE TUBE HAS A 0.125 TO 0.130 INTERNAL KEYWAY ALONG THE LENGTH AND TWO HOLES, 1 INCH APART, 0.203 DIAMETER THRU 1 SIDE, 0.250-20 UNC; TUBE OUTER DIAMETER IS 1.00; INNER DIAMETER IS 0.628 TO 0.630, AND 0.685 TO 0.695 AT KEYWAY; BOTH LEGS ARE 0.250 INCHES THICK IN
FIRST LEG STYLEEXTENDED FLAT
MATERIAL DOCUMENT AND CLASSIFICATIONAISI-1020 ASSN STD SINGLE MATERIAL RESPONSE
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.940 INCHES MINIMUM AND 1.060 INCHES MAXIMUM IN
FIRST LEG WIDTH1.940 INCHES MINIMUM AND 2.060 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYWEIGHT ARM
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 93016H4109?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 93016H4109?
93016H4109 is a BRACKET,ANGLE.
What is the NSN for 93016H4109?
93016H4109 is cataloged in the U.S. Government catalog under NSN 5340-01-508-8164. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 93016H4109

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.