PartsTable
Technical Data Sheet
Download PDF

930020 — FRAME SECTION,STRUCTURAL,VEHICUL

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

930020: FRAME SECTION,STRUCTURAL,VEHICUL.

FRAME SECTION,STRUCTURAL,VEHICUL. Key specifications include material: STEEL, overall_width: 2.750 INCHES NOMINAL IN, overall_length: 38.500 INCHES NOMINAL IN, mounting_method: PRESS FIT, vehicle_year(s): 2012, mounting_position: RIGHT SIDE. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-088-0331, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
930020
NSN: 3110-01-088-0331
NIINs: 010880331, 015990134
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 09205 — LOCKHEED MARTIN CORP ELECTRONICS AND MISSILES DIV (USA)
SPECIFICATIONS
materialSTEEL
overall_width2.750 INCHES NOMINAL IN
overall_length38.500 INCHES NOMINAL IN
mounting_methodPRESS FIT
vehicle_year(s)2012
mounting_positionRIGHT SIDE
end_item_identification3895-01-577-2425;PAVING MACHINE,BITUMINOUS MATERIAL
vehicle_design_control_activity58785
vehicle_identification_designator8816M
part_name_assigned_by_controlling_agencyEXTENSION ARM, RIGHT SIDE
NSN3110-01-088-0331
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 930020 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
ROLLING ELEMENT DIAMETER: 0.0420 INCHES MINIMUM AND 0.0520 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: RETAINER AND BALLS, THRUST
•
OUTSIDE DIAMETER: 0.4220 INCHES MINIMUM AND 0.4320 INCHES MAXIMUM IN
•
BORE DIAMETER: 0.1910 INCHES MINIMUM AND 0.2010 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP E52100 BALL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
ROLLING ELEMENT DIAMETER0.0420 INCHES MINIMUM AND 0.0520 INCHES MAXIMUM IN
STYLE DESIGNATORRETAINER AND BALLS, THRUST
OUTSIDE DIAMETER0.4220 INCHES MINIMUM AND 0.4320 INCHES MAXIMUM IN
SPECIAL FEATURESLUBICANT MIL-G-23827; ABEC GRADE 25; HEAT STABILIZED FOR OPERATION AT MINUS 54 DEG C TO PLUS 85 DEG C DEGC
BORE DIAMETER0.1910 INCHES MINIMUM AND 0.2010 INCHES MAXIMUM IN
MATERIALSTEEL COMP E52100 BALL
MATERIALPLASTIC POLYAMIDE NYLON RETAINER
RETAINER PIECE QUANTITY1
SUBSTITUTES & CROSS-REFERENCES 3
01N07Reference document
Same NSN cross-reference
Reference document — Secondary reference
01X11MKReference document
Same NSN cross-reference
Reference document — Design control — primary reference
FT101Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 930020?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 930020?
930020 is a FRAME SECTION,STRUCTURAL,VEHICUL.
What parts can replace 930020?
There are 3 known substitutes for 930020: 01N07, 01X11MK, FT101. Substitute compatibility should be verified for your specific system.
What is the NSN for 930020?
930020 is cataloged in the U.S. Government catalog under NSN 3110-01-088-0331. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 930020

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.