PartsTable
Technical Data Sheet
Download PDF

930-001B11 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

930-001B11: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROSILICONE CLASS FQ OVERALL, overall_width: 1.554 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN, overall_length: 1.554 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN, special_features: THE GASKET THICKNESS IS 0.030 INCHES. IN, style_designator: NON-CIRCULAR ROUNDED W/APERATURE, aperture_diameter: 1.430 INCHES MINIMUM AND 1.444 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5330-01-650-3807, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
930-001B11
NSN: 5330-01-650-3807
FSC: 5330 — Packing and Gasket Materials
CAGE: 06324 — GLENAIR, INC. (USA)
SPECIFICATIONS
materialRUBBER FLUOROSILICONE CLASS FQ OVERALL
overall_width1.554 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN
overall_length1.554 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN
special_featuresTHE GASKET THICKNESS IS 0.030 INCHES. IN
style_designatorNON-CIRCULAR ROUNDED W/APERATURE
aperture_diameter1.430 INCHES MINIMUM AND 1.444 INCHES MAXIMUM IN
outside_corner_radius0.120 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
smallest_bolt_hole_diameter0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
precious_material_and_locationPLATING ON EMBEDDED ALUMINUM PIECES. SILVER
center_to_center_distance_between_smallest_bolt_holes1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM IN
NSN5330-01-650-3807
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 930-001B11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-CIRCULAR ROUNDED W/APERATURE
•
SMALLEST BOLT HOLE DIAMETER: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 1.430 INCHES MINIMUM AND 1.444 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN SMALLEST BOLT HOLES: 1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM IN
•
PRECIOUS MATERIAL AND LOCATION: PLATING ON EMBEDDED ALUMINUM PIECES. SILVER
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNON-CIRCULAR ROUNDED W/APERATURE
OVERALL LENGTH1.554 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN
SMALLEST BOLT HOLE DIAMETER0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
OVERALL WIDTH1.554 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN
APERTURE DIAMETER1.430 INCHES MINIMUM AND 1.444 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN SMALLEST BOLT HOLES1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM IN
SPECIAL FEATURESTHE GASKET THICKNESS IS 0.030 INCHES. IN
PRECIOUS MATERIAL AND LOCATIONPLATING ON EMBEDDED ALUMINUM PIECES. SILVER
OUTSIDE CORNER RADIUS0.120 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROSILICONE CLASS FQ OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
PS155-105534-22Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 930-001B11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 930-001B11?
930-001B11 is a GASKET.
What parts can replace 930-001B11?
There is 1 known substitute for 930-001B11: PS155-105534-22. Substitute compatibility should be verified for your specific system.
What is the NSN for 930-001B11?
930-001B11 is cataloged in the U.S. Government catalog under NSN 5330-01-650-3807. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 930-001B11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.