PartsTable
Technical Data Sheet
Download PDF

93-4906 — FILTER,BAND PASS

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

93-4906: FILTER,BAND PASS.

The FILTER,BAND PASS is a the manufacturer industrial component. Key specifications include overall_width: 4.2500 INCHES NOMINAL4.2500 INCHES NOMINAL IN, overall_length: 5.5000 INCHES NOMINAL5.5000 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S)UNTHREADED HOLE(S), surface_treatment: ZINC OVERALL, end_item_identification: COMMON IFF DIGITAL TRANSPONDER (CXP), mounting_facility_width: 3.6250 INCHES NOMINAL3.6250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-411-0886, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 93-4906
NSN: 5340-01-411-0886
NIINs: 014110886, 016119956
FSC: 5340 — Hardware, Commercial
CAGE: 19220 — EASTERN CO DIV EBERHARD MANUFACTURING (USA)
SPECIFICATIONS
overall_width4.2500 INCHES NOMINAL4.2500 INCHES NOMINAL IN
overall_length5.5000 INCHES NOMINAL5.5000 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)UNTHREADED HOLE(S)
surface_treatmentZINC OVERALL
end_item_identificationCOMMON IFF DIGITAL TRANSPONDER (CXP)
mounting_facility_width3.6250 INCHES NOMINAL3.6250 INCHES NOMINAL IN
mounting_facility_diameter0.2650 INCHES NOMINAL0.2650 INCHES NOMINAL IN
mounting_facility_quantity44
part_name_assigned_by_controlling_agencyFILTER, BANDPASS
center_to_center_distance_between_mounting_facilities_parallel_to_length4.1250 INCHES NOMINAL4.1250 INCHES NOMINAL IN
NSN5340-01-411-0886
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 93-4906 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY DIAMETER: 0.2650 INCHES NOMINAL0.2650 INCHES NOMINAL IN
•
MOUNTING FACILITY QUANTITY: 44
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 4.1250 INCHES NOMINAL4.1250 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)UNTHREADED HOLE(S)
•
SURFACE TREATMENT: ZINC OVERALL
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY DIAMETER0.2650 INCHES NOMINAL0.2650 INCHES NOMINAL IN
MOUNTING FACILITY QUANTITY44
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.1250 INCHES NOMINAL4.1250 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)UNTHREADED HOLE(S)
OVERALL LENGTH5.5000 INCHES NOMINAL5.5000 INCHES NOMINAL IN
OVERALL WIDTH4.2500 INCHES NOMINAL4.2500 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
END ITEM IDENTIFICATIONW/S:AIRCRAFT, ORION P-3; AIRCRAFT, HAWKEYE E-2C; AIRCRAFT, HORNET F/A-18W/S:AIRCRAFT, ORION P-3; AIRCRAFT, HAWKEYE E-2C; AIRCRAFT, HORNET F/A-18 W
MOUNTING FACILITY WIDTH3.6250 INCHES NOMINAL3.6250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
1709AS706Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
1-DSLZNWHReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 93-4906?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 93-4906?
93-4906 is a FILTER,BAND PASS. It is classified as a MRO (MRO_GENERAL).
What parts can replace 93-4906?
There are 2 known substitutes for 93-4906: 1709AS706, 1-DSLZNWH. Substitute compatibility should be verified for your specific system.
What is the NSN for 93-4906?
93-4906 is cataloged in the U.S. Government catalog under NSN 5340-01-411-0886. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 93-4906

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.