PartsTable
Technical Data Sheet
93-29 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

SOCKET,PLUG-IN ELECTRONIC COMPON. Key specifications include height: 0.062 INCHES NOMINAL IN, diameter: 0.188 INCHES NOMINAL IN, material: STEEL COMP 6150 OVERALL, body_style: TOP MOUNT W/METAL SADDLE AND SHIELD BASE, head_style: HEXAGON, head_height: 0.219 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-186-5010, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
93-29
NSN: 5330-00-186-5010
FSC: 5330
CAGE: 33667 — KING ENGINEERING CORPORATION DBA KING-GAGE SYSTEMS (USA)
SPECIFICATIONS
height0.062 INCHES NOMINAL IN
diameter0.188 INCHES NOMINAL IN
materialSTEEL COMP 6150 OVERALL
body_styleTOP MOUNT W/METAL SADDLE AND SHIELD BASE
head_styleHEXAGON
head_height0.219 INCHES NOMINAL IN
thread_class3A A
thread_length0.438 INCHES MINIMUM IN
chamfer_length0.047 INCHES NOMINAL IN
overall_height1.156 INCHES NOMINAL IN
overall_length1.094 INCHES NOMINAL IN
fastener_length1.766 INCHES NOMINAL IN
NSN5330-00-186-5010
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 93-29 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
MATERIALRUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
T9316-1Interchangeable
interchangeable cross-reference
interchangeable
T9324Interchangeable
interchangeable cross-reference
interchangeable
7915Interchangeable
interchangeable cross-reference
interchangeable
114782Interchangeable
interchangeable cross-reference
interchangeable
103493Interchangeable
interchangeable cross-reference
interchangeable
8816Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 93-29?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 93-29?
93-29 is a SOCKET,PLUG-IN ELECTRONIC COMPON.
What parts can replace 93-29?
There are 11 known substitutes for 93-29: T9316-1, T9324, 7915 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 93-29?
93-29 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-186-5010. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 93-29